5/5

(bottom view)

Mounting Holes

S

1A,2A Mounting Holes

1C,2C Mounting Holes

1B,2B Mounting Holes

Typical drawing

Single coil without

this terminal

Single coil without

this terminal

Single coil without

this terminal

Y32M

Typical drawing is just for reference

, customized terminals with metering components are acceptable.

Disclaimer

:

This datasheet is just for customers

' reference. The newest specification you can get from the website of sanyou relays.

We could not evaluate all the performances and parameters for all possible applications

,

choose the suitable relay for their own application or require us to provide necessary help

.

Dongguan Sanyou Electrical appliance Co.,LTD

. All rights reserved.　

Announcements

：

1 The magnetic latching relay is to be supplied with contacts close(Operate) or contacts open(Release),

be the nominal operate

/release voltage,

specification but less than

1 minute.

Do not apply power to Operate and Release coils at the same time

.

Note

:

Please contact us for any special requirements

.

contact status according to your requirement

.

please contact Sanyou for the technical service

, however, it is the user's responsibility to determine which relay

but the contact

You can reset the

energized voltage to Operate or Release coil should

impulse width should be

5 times more than specified operate/release time in the

so the user should

If there is any query,

should be used

.