Automatic Dicing Saw

DAD3660

Easy operation



User friendly

A 19-inch large monitor and large buttons provide ease of use.



Condition monitoring functions

Monitoring of utilities, spindle current and more



Operator assist functions

- Auto-alignment

By performing teach (procedure to register the cutting position) in

advance for each device, auto-alignment is possible by only selecting

the device data.

- Kerf checking

Automatic measurement of cut line deviations and kerf width to

manage cut quality.

Efficient use of space

Auxiliary equipment (UPS, transformer for use outside of Japan, CO2

injector, booster pump unit) has typically been external, but the

DAD3660 allows many of these units to be installed internally to save

space.

Large 19-inch monitor

Specification

Unit

1.8kW

-

Cutting range

mm

Cutting speed

mm/sec

Cutting range

mm

Index step

mm

Index positioning accuracy

mm

Max. stroke

mm

Moving resolution

mm

32.2

31.4

Repeatability accuracy

mm

θ-axis

Max. rotating angle

mm

Output

deg

Rated torque

N・m0.29

0.70

Revolution speed range

min

-1

6,000-60,000

3,000-30,000

mm

kg

Spindle

0.003/260

(Single error)0.002/5

Approx.1,500

0.00005

0.001

320

Machine dimensions (W×D×H)

Z-axis

0.0001

Y-axis

Specifecation

X-axis

Workpiece size

0.1 ～ 1,000

φ300

(360 mm square: DPR)

400

Machine weight

1,350×1,200×1,890

400

2015.3

Environmental Conditions

• Use clean, oil-free air (dew point between -10 - -20 , residual oil: 0.1 ppm, and filtration rating: 0.01μm/99.5 % or more).

• Keep room temperature fluctuations within ±1℃ of the set value. (Set value should be between 20 - 25 ℃).

• Keep cutting water and cleaning water 2 ℃ above room temperature (fluctuations within ±1 ℃).

• The machines should be used in an environment, free from external vibration. Do not install machine near a ventilation opening, heat generation equipment or oil mist generating parts.

• This machine uses water. In case of water leakage, please install the machine on the floor with sufficient waterproofing and drainage treatments.

* All pressures specified above are gauge pressures.

* As the above specification may change due to technical modifications.

Please confirm when placing your order.

* For further information, please contact your local sales representative.

www.disco.co.jp