Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks

of Cree, Inc.

9

Copyright © 2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.

9

Cree PLCC4 1 in 1 SMD LED

CLM4B-RKC/AKC

NOTES

•

The packaging sizes of these SMD products are very small and the resin is still soft after solidification. Users are

required to handle with care. Never touch the resin surface of SMD products.

•

To avoid damaging the product’s surface and interior device, it is recommended to choose a special nozzle to pick

up the SMD products during the process of SMT production. If handling is necessary, take special care when picking

up these products. The following method is necessary:

Document No.: CREE-05-0057

Rev. NO.

:

16

9/9

pickupSMDproductsduringtheprocessofSMTproduction.Ifhandlingisnecessary,itshouldtakemore

careful to pick up these products.Thefollowingtwomethodsarenecessary :

Fig.1a: For Small Top SMD

Fig.1b: For Mini side 0.8mm SMD



ForSmallTopSMDseries,itisrecommendedtouserubbermaterialNozzletopickupSMDproducts.Two

figuresize for reference :

a.) Circular Nozzle: inner diameter: Ø1.8mm+/-0.05mm, outer diameter: Ø2.3mm+/-0.05mm.

b.)Rectangle Nozzle: innersize:1.3mm x 2.3mm,outer size > SMDsize.

6. Electrostatic Discharge and Surge current



Electrostaticdischarge (ESD) orsurgecurrent(EOS) maydamageSMD LED.



PrecautionssuchasESDwriststrap,ESDshoestraporantistaticglovesmustbewornwheneverhandlingofSMD LED.



Alldevices,equipmentandmachinerymustbeproperlygrounded.



Itisrecommendedto perform electrical test to screen out ESD failures at final inspection.



Itisimportanttoeliminatethepossibilityofsurgecurrentduringcircuitrydesign

7. Heat Management

HeatmanagementofSMD LEDmustbetakenintoconsiderationduringthedesignstageof SMD LED application. The

current should be de-ratedappropriatelybyreferringtothede-ratingcurveattachedoneachproductspecification.

Dataissubjecttochangewithoutpriornotice.