GD5F2GQ4RFZIH datasheet(21/47 Pages) GIGADEVICE

Part #	GD5F2GQ4RFZIH

Description	SPI(x1/x2/x4) NAND Flash

PDF	47 Pages

Scroll/Zoom	100%

Manufacturer	GIGADEVICE [GigaDevice Semiconductor (Beijing) Inc.]

Direct Link	http://www.gigadevice.com/

Logo

21 / 47 page

SPI(x1/x2/x4) NAND Flash

9.8 Read From Cache Quad IO (EBH)

The Read from Cache Quad IO command is similar to the Read from Cache x4 command, followed a 12-bit column address

for the starting byte address and a dummy byte by SIO0, SIO1, SIO3, SIO4, each bit being latched in during the rising

edge of SCLK, then the cache contents are shifted out 4-bit per clock cycle from SIO0, SIO1, SIO2, SIO3. The first byte

addressed can be at any location. The address is automatically incremented to the next higher address after each byte of

data is shifted out until the end of whole page. The Quad Enable bit (QE) of feature (B0[0]) must be set to enable the read

from cache quad IO command.

Figure9-7. Read From Cache Quad IO Sequence Diagram

Command

EBH

CS#

SCLK

SI(SIO0)

SO(SIO1)

9 10 11 12 13 14 15

16 17 18 19 20 21 22 23

A7-0

WP#(SIO2)

HOLD#(SIO3)

Dummy

Byte0 Byte1

Dummy, A11-A8

GD5F2GQ4RFZIH Datasheet(PDF) 21 Page - GigaDevice Semiconductor (Beijing) Inc.