GD25LQ128DSJS datasheet(26/79 Pages) GIGADEVICE

26 / 79 page

1.8V Uniform Sector

Dual and Quad Serial Flash

GD25LQ128D

7.10. Dual I/O Fast Read (BBH)

The Dual I/O Fast Read command is similar to the Dual Output Fast Read command but with the capability to input

the 3-byte address (A23-0) and a

“Continuous Read Mode” byte 2-bit per clock by SI and SO, each bit being latched in

during the rising edge of SCLK, then the memory contents are shifted out 2-bit per clock cycle from SI and SO. The command

sequence is shown in followed Figure11. The first byte addressed can be at any location. The address is automatically

incremented to the next higher address after each byte of data is shifted out.

Dual I/O Fast Read with

“Continuous Read Mode”

The Dual I/O Fast Read command can further reduce command overhead through setting the

“Continuous Read Mode”

bits (M7-0) after the input 3-byte address (A23-A0). If the

“Continuous Read Mode” bits (M5-4) = (1, 0), then the next Dual

I/O Fast Read command (after CS# is raised and then lowered) does not require the BBH command code. The command

sequence is shown in followed Figure11. If the

“Continuous Read Mode” bits (M5-4) do not equal (1, 0), the next command

requires the first BBH command code, thus returning to normal operation. A

“Continuous Read Mode” Reset command can

be used to reset (M5-4) before issuing normal command.

Figure11. Dual I/O Fast Read Sequence Diagram (M5-4

≠ (1, 0))

Command

BBH

CS#

SCLK

SI(IO0)

SO(IO1)

9 10 11 12 13 14 15

16 17 18 19 20 21 22 23

A23-16

A15-8

A7-0

M7-0

CS#

23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39

SI(IO0)

SO(IO1)

SCLK

Byte1

Byte2

Byte3

Byte4

GD25LQ128DSJS Datasheet(PDF) 26 Page - GigaDevice Semiconductor (Beijing) Inc.

GD25LQ128DSJS Datasheet(HTML) 26 Page - GigaDevice Semiconductor (Beijing) Inc.

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79

Datasheet Download

Link URL