Input Response Time

Indicator On/Off: 500 milliseconds maximum

Leakage Current Immunity

500 µA

Application Note: The use of relay output PLC is recommended since there

is no leakage current. Solid state output PLCs often have leakage current

above 1 mA and, therefore, turn the light on in the off state. To counteract

the leakage current, a shunt resistor must be used. A resistor must be

applied from the neutral wire of the device to the hot wire of each channel of

the device.

Audible Alarm

Standard Audible Alarm: 2.7 kHz ± 500 Hz oscillation frequency; maximum

intensity 92 dB at 1 m (3.3 ft) (typical)

Standard Audible Alarm: 2.7 kHz ± 500 Hz oscillation frequency; maximum

intensity 92 dB at 1 m (3.3 ft) typical)

Omni-Directional Sealed Audible Alarm: 2.1 kHz ± 250 Hz oscillation

frequency; maximum intensity 99 dB at 1 m (3.3 ft) (typical)

Omni-Directional Sealed Audible Alarm with Intensity Adjustment: 2.1 kHz

± 250 Hz oscillation frequency; maximum intensity 95 dB at 1 m (3.3 ft)

(typical)

Typical Reduction in Sound Intensity with Audible Adjustment (maximum to

minimum)

•

Standard Audible: 30 dB

•

Sealed Audible: 20 dB

•

Omni-Directional Sealed Audible: 12 dB

Indicators

LEDs are independently selected; 1 to 5 colors depending on model

Indicator Characteristics

Color

Dominant Wavelength

(nm) or Color

Temperature (CCT)

Color

Coordinates4

Lumen

Output

(Typical at

25 °C)

x

y

Green

528 nm

–

–

23.0

Red

625 nm

–

–

7.5

Yellow

590 nm

–

–

5.0

Blue

470 nm

–

–

4.0

Orange

608 nm

–

–

15.5

White

6000 K

–

–

21.0

Turquoise

–

0.19

0.37

5.5

Violet

–

0.20

0.08

2.5

Magenta

–

0.35

0.15

3.0

Sky Blue

–

0.19

0.26

12.0

Audible Adjustment

Standard Audible Alarm: Unscrew the cover (up to 1.5 turns maximum) to

adjust the audible intensity. (Do not exceed 1.5 turns or the cover may

detach during operation.) For maximum intensity, rotate the center plug

180° counterclockwise to remove it.

Sealed Audible Alarm and Omni-Directional Sealed Audible Alarm with

Intensity Adjustment: Rotate the front cover until the desired intensity is

reached.

Omni-Directional Sealed Audible Alarm: No adjustment.

Operating Conditions

Non-Audible: –40 °C to +50 °C (–40 °F to +122 °F)

Standard and Sealed Audible: –20 °C to +50 °C (–4 °F to +122 °F)

90% at +50 °C maximum relative humidity (non-condensing)

Environmental Rating

UL Type 4X Indoor and UL Type 13

Non-Audible and Sealed Audible: IEC IP67

Standard Audible: IEC IP50

Certifications

Required Overcurrent Protection

WARNING: Electrical connections must be

made by qualified personnel in accordance with

local and national electrical codes and

regulations.

Overcurrent protection is required to be provided by end product

application per the supplied table.

Overcurrent protection may be provided with external fusing or via Current

Limiting, Class 2 Power Supply.

Supply wiring leads < 24 AWG shall not be spliced.

For additional product support, go to

www.bannerengineering.com.

Supply Wiring (AWG)

Required Overcurrent Protection (Amps)

20

5.0

22

3.0

24

2.0

26

1.0

28

0.8

30

0.5

Dimensions

M30 x 1.5

45

[1.77]

19

[0.75]

Ø50

[1.97]

4x 26.9

[1.06]

1/2-14 NPSM

H

# of

Colors

Tower Height (H)

Non-Audible

Standard Audible*

Sealed Audible

Omni-Directional

Sealed Audible

1

130.2 mm (5.1 in)

161.0 mm (6.3 in)

184.1 mm (7.2 in)

198.1 mm (7.8 in)

2

170.9 mm (6.7 in)

201.7 mm (7.9 in)

224.8 mm (8.9 in)

238.8 mm (9.4 in)

3

211.6 mm (8.3 in)

242.4 mm (9.5 in)

265.5 mm (10.5 in)

279.5 mm (11.0 in)

4

252.3 mm (9.9 in)

283.1 mm (11.1 in)

306.2 mm (12.1 in)

320.2 mm (12.6 in)

5

293.0 mm (11.5 in)

-

-

-

* Tower height (H) with top unscrewed approximately 3.5 mm to allow sound to escape

All measurements are listed in millimeters [inches], unless noted otherwise.

4 Refer to CIE 1931 chromaticity diagram or color chart, to show equivalent color with indicated color coordinates.

TL50Z Universal AC Voltage Tower Light

P/N 169421 Rev. J

www.bannerengineering.com - Tel: + 1 888 373 6767

3