LED Backlights (100 x 200 mm)

Printed in USA

05/01

P/N 67431

LED Backlight Models

204.7 mm

(8.06")

Active Area

224.4 mm

(8.83")

103.1 mm (4.06")

Active Area

142.8 mm

(5.62")

26.2 mm

(1.03")

82.6 mm

(3.25")

203.2 mm

(8.00")

1/4-20 (4x)

1.8 m

(6.0')

30.1 mm

(1.19")

10.6 mm

(0.42")

Models

Illumination

Type

Color

Cable

Supply

Voltage

Supply

Current

Connections

LEDRB100X200N

Continuous

diffused light

Red 640 nm

1.8 m (6')

terminated

with 9-pin

D-sub

connector

(male pins)

12V dc ±10%

with voltage

regulation of ±1%

450 mA max.

Pin 4 = +V

Pin 3 = dc common

Power supply model

PSA-12(E) or

PS2V-12(E)

is recommended

(see other side)

WARRANTY: Banner Engineering Corp. warrants its products to be free from defects for one year. Banner Engineering Corp. will repair or replace, free of

charge, any product of its manufacture found to be defective at the time it is returned to the factory during the warranty period. This warranty does not cover

damage or liability for the improper application of Banner products. This warranty is in lieu of any other warranty either expressed or implied.

Features

• 100 x 200 mm LED arrays for backlight illumination

• Choose models with visible red or infrared light

• Black anodized aluminum housing

Environmental Rating

IEC IP20; NEMA 1

Operating Conditions

Temperature: 0° to 40°C (+32° to 104°F)

Maximum relative humidity: 95% at 40°C (non-condensing)

Useful Life

Infrared: 50,000 hours; Visible red:60,000 hours

Infrared 940 nm

350 mA max.