SL2S1502 datasheet(16/33 Pages) NXP

16 / 33 page

NXP Semiconductors

SL2S1402_SL2S1502_SL2S1602

ICODE ILT

SL2S1402_SL2S1502_SL2S1602

All information provided in this document is subject to legal disclaimers.

Product data sheet

Rev. 3.3 — 15 October 2019

COMPANY PUBLIC

234333

16 / 33

11 Interrogator commands and tag replies

For a detailed description refer to Section 18, Ref. 2.

11.1 Commands

An overview of interrogator to tag commands is located in Section 18, Ref. 2.

Note that all mandatory commands are implemented on the ICODE ILT according to

the standard. Additionally the optional command Access is supported by the ICODE

ILT IC (for details refer to Section 11.5 "Optional Access Command"). Besides also

custom commands are implemented on the ICODE ILT IC (for details refer to Section

11.7 "Custom Commands".

11.2 Mandatory Select Commands

Select commands select a particular ICODE ILT tag population based on user-defined

criteria.

11.2.1 Select

For a detailed description of the mandatory Select command refer to Section 18, Ref. 2.

11.3 Mandatory Inventory Commands

Inventory commands are used to run the collision arbitration protocol.

11.3.1 BeginRound

For a detailed description of the mandatory BeginRound command refer to Section 18,

Ref. 2.

11.3.2 AdjustRound

For a detailed description of the mandatory AdjustRound command refer to Section 18,

Ref. 2.

11.3.3 NextSlot

For a detailed description of the mandatory NextSlot command refer to Section 18, Ref.

11.3.4 ACK

For a detailed description of the mandatory ACK command refer to Section 18, Ref. 2.

11.3.5 NAK

For a detailed description of the mandatory NAK command refer to Section 18, Ref. 2.

SL2S1502 Datasheet(PDF) 16 Page - NXP Semiconductors