ITE151 datasheet(3/6 Pages) BK

3 / 6 page

www.bkprecision.com

DC Electronic Loads

8500 Series

Rear panel

1) Air vents

Temperature-controlled fan expels air through

these vents to keep the temperature constant

inside the system.

2) Trigger and remote sensing terminal

block

Connect sensing lines to this terminal to

compensate for voltage drops due to load wire

resistance. This terminal block also contains the

two connections for the remote TTL trigger input

signal.

Front panel

The numeric keys and rotary knob provide a

convenient interface for setting the operating

mode and desired current/voltage/resistance

levels quickly and precisely. Voltage and current

can be set to a maximum resolution of 1 mV and

0.1 mA respectively (models 8500 and 8502

only). Up to 25 different instrument setups can

be stored and recalled from internal memory.

1) High resolution, easy to read display

Displays set values and measured values.

Current/voltage and power/resistance displays

can be toggled. Display resolution for current

and voltage is user-selectable. Maximum

resolution for model 8500 and 8502 is 1 mV/

0.1 mA.

2) Convenient data entr y

Rotary knob for quick analog-style control. Turn

to adjust a setting value. Press to toggle

measurement display mode.

3) Numeric keypad

Conveniently enter set values directly and access

secondary functions.

4) Function keys

Activate current, voltage, power, or resistance

modes and scroll through menus and options.

5) Front panel load terminals

Connect to device under test. Hex-head screw

Hex-head screw terminals

3) Interface connection

Serial interface connector for USB

communication.

4) Voltage switch

Line voltage selection switch (110 VAC or 220

VAC).

Terminals are used for models 8518 and

8520 – 8526 to connect wires.

ITE151 Datasheet(PDF) 3 Page - B&K Precision Corporation

ITE151 Datasheet(HTML) 3 Page - B&K Precision Corporation

Html Pages

1 2 3 4 5 6

Datasheet Download

Link URL