Optical & Electrical Characteristics

7

PDS-002823 Rev 02 © 2017 Luminus Devices, Inc. - All Rights Reserved

Luminus Devices, Inc. • T 408.708.7000 • www.luminus.com

1145 Sonora Court • Sunnyvale, CA 94086 USA

SFT-10 Product Datasheet

General Characteristics

Symbol

Red -Amber

Converted

Green

Blue*

Unit

Emitting Area

1.0

1.0

1.0

Emitting Area Dimensions

1.0 x 1.0

1.0 x 1.0

1.0 x 1.0

mm x mm

Performance at Standard Test Conditions (See definition on p5)

typ

Φ

v

120

259

34

lm

typ

Φ

r

0.42

0.55

0.88

W

Dominant Wavelength

min

λ

dmin

609

545

449

nm

typ

λ

d

613

555

455

max

λ

dmax

621

565

461

FWHM- Spectral bandwidth at 50%

of Φv

typ

16

98

19

typ

x

0.66

0.33

0.14

CIE x

typ

y

0.32

0.56

0.04

CIE y

Forward Voltage

min

V

F min

2.2

2.5

2.5

V

typ

V

F

2.5

3.0

3.0

max

V

F max

3.0

3.6

3.6

Reference Drive Current

typ

I

F

2.5

2.5

2.5

A

Reference Duty Cycle

typ

25

50

25

%

Luminous Flux

typ

Φ

v

300

650

100

lm

Radiometric Flux

typ

Φ

r

1.1

1.4

2.0

W

Dominant Wavelength

typ

λ

d

613

555

453

nm

FWHM -Spectral bandwidth at 50%

of Φv

typ

15

99

19

typ

x

0.66

0.32

0.14

typ

y

0.33

0.55

0.04

Forward Voltage

typ

V

F

3.6

3.5

3.4

V

Note 1: All ratings are based on standard testing conditions unless specified otherwise.

Note 2: Parameters rated at Standard Test condition as defined on page 6.

Note 3: Duty Cycle used to specify device ratings under Pulsed operation. SFT-Series of LEDs can operate at duty cycles ranging from 1% to 100%. At

higher duty cycles, drive current should be adjusted to maintain the junction temperature at desired levels to meet the application lifetime

requirements.

Note 4: In pulsed operation, rise time from 10 to 90% of forward current should be larger than 0.5 microseconds.

Note 6: CIE 1931 chromaticity diagram coordinates, normalized to X+Y+Z=1.

Note 7:

For Reference only.