ASM1817

Alliance Semiconductor

2575 Augustine Drive . Santa Clara, CA 95054 . Tel: 408.855.4900 . Fax: 408.855.4999 . www.alsc.com

Notice: The information in this document is subject to change without notice

rev 1.5

Low Power, 3.3V/3.0V µP Reset, Active HIGH, Push-Pull Output

February 2005

General Description

The ASM1817 voltage supervisory device with low-power, 3.3V/

3.0V µP Reset, active HIGH, Push-Pull output. Maximum

supply current over temperature is a low 15µA (at 3.6V).

The ASM1817 generates an active HIGH reset signal whenever

the monitored supply is out of tolerance. A precision reference

Tolerance level options are 5%, 10% and 20% percent. When

an out-of-tolerance condition is detected, an internal power-fail

signal is generated which forces an active HIGH reset signal.

remains active for 150ms to allow the power supply and system

microprocessor to stabilize.

The ASM1817 is designed with a push-pull output stage and

operates over the extended industrial temperature range.

Devices are available in TO-92 and compact surface mount

SOT-23 packages.

Other low power products in this family include the ASM1810/

11/12/15/16, ASM1233D and ASM1233M.

Key Features

•

Low Supply Current

•20 µA maximum (5.5 V)

•15 µA maximum (3.6 V)

•

Automatically restarts a microprocessor after power failure

•

dition

•

Active HIGH power-up reset

•

Precision temperature-compensated voltage reference and

comparator

•

Eliminates external components

•

TO-92 and compact surface mount SOT-23 package

•

Push-Pull output for minimum current drain

•

Operating temperature -40°C to +85°C

Applications

•

Set-top boxes

•

Cellular phones

•PDAs

•

Energy management systems

•

Embedded control systems

•

Printers

•

Single board computers

Typical Operating Circuit

Block Diagram

Microprocessor

RESET

RESET

GND

ASM1817

ASM1817

Supply

Reference

Delay

150ms

Typical

Tolerance

Bias

+

-

Supply

Tolerance

Bias

-

GND

RESET

Reference

+