2004 Aug 10

6

Philips Semiconductors

Objective specification

132

× 132 RGB single chip TFT driver

with DC-to-DC converter

PCF8881

6

LIMITING VALUES

In accordance with the Absolute Maximum Rating System (IEC 60134); notes 1, 2 and 3.

Note

1. Stresses above the given values will cause permanent damage to the device.

2. Parameters are valid over the operating temperature range unless otherwise specified.

4. The storage temperature specifies a safe temperature range for the chip when not powered.

SYMBOL

PARAMETER

MIN.

MAX.

UNIT

logic supply voltage

−0.5

+4.0

V

analog supply voltage

−0.5

+5.5

V

grey level reference voltage range

−0.5

+5.5

V

input / output voltage (any input / output)

−0.5

V

DC input current

−10

+10

mA

DC output current

−10

+10

mA

supply current

−50

+50

mA

total power dissipation per package

−

tbd

mW

P/out

power dissipation per output

−

tbd

mW

storage temperature; note 4

−55

+125

°C

operating temperature

−40

+85

°C

7

HANDLING

Inputs and outputs are protected against electrostatic discharge in normal handling. However it is good practice to take

normal precautions appropriate to handling MOS devices (see

“Handling MOS devices”).