Silicom Ltd. Connectivity Solutions

Page

5

CE IEC 6100-4-5:1995

Immunity to conductive surges COM Mode; 2kV,

Dif. Mode 1kV

CE IEC 6100-4-6:1996

Conducted immunity (0.15-80 MHz) 3VRMS 80% A.M.

By 1kHz

CE IEC 6100-4-11:1994

Voltage Dips and Short Interruptions

V reduc >95%, 30% >95% Duration 0.5per, 25per, 250per

LEDs

LEDs:

(2) LEDs per port

Left LED: Link/Act :

Turns on link (Green),

Blinks on activity (Green)

Right LED : Link Speed / Bypass / Disconnect :

Turns on Yellow 1G Link.

Blink Yellow on Disconnect

Blink Green on Bypass

LEDs location:

LEDs are located on the PCB, visible via holes in the metal bracket. Each 2 green act/ link and

speed link/bypass/disconnect LEDs are located above their own LC connector port- visible by

light pipes.

Connectors:

(4) LC

Functional Description

Silicom’s Quad Port Fiber Bypass adapter supports Normal, Bypass and Disconnect modes. In Normal mode, the ports are

independent interfaces (see Figure 1: Normal mode, one Bypass pair is illustrated).

Figure 1: Normal Mode Functional Block Diagram