SY89206V datasheet(2/16 Pages) MICROCHIP

2 / 16 page

SY89206V

DS20006210B-page 2

 2019 Microchip Technology Inc.

1.0

ELECTRICAL CHARACTERISTICS

Absolute Maximum Ratings †

PECL Power Supply Voltage (VCC) (Note 1).............................................................................................................. +8V

NECL Power Supply Voltage (VEE) (Note 2) .............................................................................................................. –8V

PECL Mode Input Voltage (VIN) (Note 3) ................................................................................................................... +6V

NECL Mode Input Voltage (VIN) (Note 4) ................................................................................................................... –6V

Continuous Output Current (IOUT).......................................................................................................................... 50 mA

Surge Output Current (IOUT) ................................................................................................................................ 100 mA

† Notice: Stresses above those listed under “Absolute Maximum ratings” may cause permanent damage to the

device. Exposure to maximum rating conditions for extended periods may affect device reliability.

Note 1: VEE = 0V.

2: VCC = 0V.

3: VEE = 0V, VIN ≤ VCC.

4: VCC = 0V, VIN ≥ VEE.

5: Mil Std. 883 Human Body Model, all pins

DC ELECTRICAL CHARACTERISTICS (Note 1)

Electrical Characteristics: VCC = 3.0V to 5.5V; VEE = 0V or VEE = –5.5V to –3.0V; VCC = 0V; TA = -40˚C to +85˚C,

unless otherwise stated.

Parameter

Symbol

Min.

Typ.

Max.

Units

Conditions

Power Supply Current

IEE

—

Output High Voltage (Note 2)

VOH

VCC - 1.085

—

VCC - 0.88

—

Output Low Voltage (Note 2)

VOL

VCC - 1.830

—

VCC - 1.555

—

Input High Voltage (Single-Ended)

VIH

VCC - 1.165

—

VCC - 0.880

—

Input Low Voltage (Single-Ended)

VIL

VCC - 1.810

—

VCC - 1.475

—

Output Reference Voltage

VBB

VCC - 1.38

—

VCC - 1.26

—

Common Mode Range (Note 3)

VIHCMR

VEE + 2.0

—

VCC - 0.4

—

Input High Current

IIH

—

150

μA

—

Input Low Current

IIL

0.5

—

μA

—

Note 1: Devices are designed to meet the DC specifications shown in the above table after thermal equilibration

has been established. The circuit is in a test socket or mounted on a printed circuit board and transverse

airflow greater than 500 lfpm is maintained.

2: Outputs are terminated through a 50Ω resistor to VCC - 2.0V.

3: The CMR range is referenced to the most positive side of the differential input voltage. Normal

operation is obtained if the high level falls within the specified range and the peak-to-peak voltage lies

between 150 mV and 1V.

SY89206V Datasheet(PDF) 2 Page - Microchip Technology

SY89206V Datasheet(HTML) 2 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Datasheet Download

Link URL