4. Physical Properties

Color:

Greenish Gray

Density:

Dimensions: 1/2 in. thick x 4 in. wide x 20.5 ft. length (12.7mm x 101.6mm x 6.24m)*

*4 in. (101.6mm) width meets or exceeds most UL-listed 3M Firestop System parameters.

Surface Burning Characteristics: Flame Spread: 0

Smoke Development: 0

Important Notice to User:

Technical Information: The technical information, recommendations and other statements contained in this document are subject to change, the accuracy or completeness of

such information is not guaranteed.

Product Use: Many factors beyond 3M’s control and uniquely within user’s knowledge and control can affect the use and performance of

a 3M product in a particular application. Given the variety of factors that can affect the use and performance of a 3M product, user is solely responsible for evaluating the 3M

product and determining whether it is fit for a particular purpose and suitable for user’s method of application.

Warranty and Limited Remedy: 3M warrants that each 3M Fire

Protection Product will be free from defects in material and manufacture for 90 days from the date of purchase from 3M’s authorized distributor. 3M MAKES NO OTHER EXPRESS

OR IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If a 3M product does not conform to this

warranty, the sole and exclusive remedy is, at 3M’s option, replacement of the 3M product or refund of the purchase price.

Limitation of Liability: Except where prohibited by

law, 3M will not be liable for any loss or damage arising from the 3M product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted.

Building and Commercial

Services Division

3M Center, Building 223-2N-21

St. Paul, MN 55144-1000 USA

1-800-328-1687

www.3M.com/firestop

3M is a trademark of 3M. Used under license in Canada.

All other trademarks are the property of their respective owners.

Please Recycle. Printed in U.S.A.

© 3M 2013. All rights reserved.

98-0213-4360-7

5. Packaging, Storage and Shelf Life

Packaging: Individually shrink-wrapped bulk rolls, 5 rolls per case.

Storage:

6. Installation Techniques

Consult a 3M Authorized Fire Protection Products Distributor /Dealer or Sales Representative for applicable drawings and details.

Preparatory Work:

The surfaces of all openings and penetrating items need to be clean, dry, frost free and free of dust.

Installation Details:

Dispense the packing material by pulling it through the center opening of the package. Tear or cut-off the packing material

once the desired length is extracted from the packaging.

If the pipe is centered within the opening, coil the packing material around the penetrating item and then slide it down into

the opening. The material should be positioned so the 4 in. (101.6mm) width is facing either the penetrating item or the

sides of the opening. In openings where the penetrating item(s) are installed off-center, the packing material should be coiled

around the penetrating items until the nearest edge of the opening is reached. All remaining open space should be filled with

strips or coils of packing material until the entire opening is filled.

An installation method that is especially suited for large and/or rectangular openings is to install the material in a continuous

accordion pattern. For a wall opening, a beginning course of material is installed along the bottom of the opening. When the

material reaches the edge of the opening, fold the material back over itself and then continue on in the opposite direction.

Barrier Sealant per the applicable system details.

Limitations:

Installation Techniques (listed above).

Product is available in bulk rolls, 1/2 in. x 4 in. x 20.5 ft. (12.7mm 101.6mm x 6.24m), 5 rolls/case (Minimum one case order; Half-pallet, one-pallet and

large volume discounts available). For additional technical and purchasing information regarding this and other 3M Fire Protection Products, please call:

1-800-328-1687 or visit www.3M.com/firestop.