3M™ Double Coated Tape 99786

Typical Performance Characteristics (continued)

180° Peel Adhesion

Substrate

5.2 N/cm

47 oz/in

ABS

Property: 180° Peel Adhesion

Method: ASTM D3330

Dwell/Cure Time: 72

Dwell Time Units: hr

Temp C: 22C

Temp F: 72F

Environmental Condition: 52%RH

Backing: Aluminum Foil

notes: 12 in/min (300 mm/min)

Property

Values

Method

Test Condition

Liner Release

4.4 N/cm

40 oz/in

ASTM D3330

90 in/min, Room

Temperature

Handling/Application Information

Application Ideas

• Foam lamination

• Gasket attachment

• Insulator attachment

• General attachment

• Nameplate attachment

Directions for Use

Handling Recommendations:

• Rolls should be handled at a minimum and handled by their core and top layer, without applying a lot of nger pressure.

• Do not handle the rolls by their sides, as this can cause the sides of the adhesive to bond with ngertips.

For additional information, please refer to the Laminating Adhesives 300MP Technical Bulletin (70-0709-3905-6).

Storage and Shelf Life

It is best to use the rolls as soon as possible after receipt. Ideally, rolls should be laminated to the intended substrates as soon after receipt as possible. Store in original

cartons at 70°F (21°C) and 50% relative humidity out of direct sunlight. When storing rolls, lay them at in a horizontal position with release treated wafers between the

rolls.

If stored under proper conditions, product retains its performance and properties for 24 months from date of manufacture.

Trademarks

3M is a trademark of 3M Company.

References

Property

Values

3m.com Product Page

https://www.3m.com/3M/en_US/company-us/all-3m-products/~/3M-

Double-Coated-Tape-99786?N=5002385+3293240959&rt=rud

Safety Data Sheet (SDS)

https://www.3m.com/3M/en_US/company-us/SDS-search/results/?

gsaAction=msdsSRA&msdsLocale=en_US&co=ptn&q=99786