DS160PR412RUAT datasheet(5/37 Pages) TI

5 / 37 page

Table 5-1. Pin Functions (continued)

I/O

DESCRIPTION

NAME

NO.

TXB0P

Non-inverting differential TX output – Port B, Channel 0.

TXB1N

Inverting differential TX output – Port B, Channel 1.

TXB1P

Non-inverting differential TX output – Port B, Channel 1.

TXB2N

Inverting differential TX output – Port B, Channel 2.

TXB2P

Non-inverting differential TX output – Port B, Channel 2.

TXB3N

Inverting differential TX output – Port B, Channel 3.

TXB3P

Non-inverting differential TX output – Port B, Channel 3.

VCC

5, 13

Power supply, VCC = 3.3 V ± 10%. The VCC pins on this device should be

connected through a low-resistance path to the board VCC plane.

VREG1

Internal regulator output. Must add decoupling capacitor of 0.22 µF near the pin.

Do not route the pin beyond the decoupling capacitor. Do not connect to VREG2.

Do not use as a power supply for any other component on the board.

VREG2

Internal regulator output. Must add decoupling caps of 0.22 µF near the pin. Do

not route the pin beyond the decoupling capacitor. Do not connect to VREG1. Do

not use as a power supply for any other component on the board.

www.ti.com

DS160PR412

SNLS685 – DECEMBER 2020

Submit Document Feedback

Product Folder Links: DS160PR412

DS160PR412RUAT Datasheet(PDF) 5 Page - Texas Instruments