Specifications are subject to change without notice (21.03.08)

3

FMB01

Function Id - Double interval

Reset and Gate inputs working mode

If Reset contact is closed the relay is released and timing is

reset. Nothing else happens until Reset is released.

If Gate contact is closed the timing operation is freezed.

When it is released, if timing was in progress, it goes on

from the point reached at the moment of closing the Gate.

Function Rb - Symmetrical Recycler OFF first

Reset and Gate inputs working mode

If Reset contact is closed the function is interrupted, the

relay is released and timing is reset. Nothing else happens

until Reset is released.

If Gate contact is closed while recycling, the timing opera-

tion is freezed and the output is kept at the state it was

when Gate has been closed. When it is released, timing

goes on from the point reached at the moment of closing

the Gate.

Operating Diagrams

T

Powersupply

LED“POWER”

Triggerinput

T

T

T

T

RelaysON

T

Powersupply

LED“POWER”

Triggerinput

T

T

T

RelaysON

T

Powersupply

LED“POWER”

Triggerinput

T

T

T

T

RelaysON

Range and operation mode selection

Function Op - Delay ON Operate

Reset and Gate inputs working mode

If Reset contact is closed the relay is released and timing is

reset. Nothing else happens until Reset is released.

If Gate contact is closed the timing operation is freezed.

When it is released, if timing was in progress, it goes on

from the point reached at the moment of closing the Gate.

Powersupply

T

LED“POWER”

Triggerinput

RelaysON

T

Operating mode display window

Operating mode selector

(function Op, Rb, R, Id, Dr, In, Io)

Scale range display windows

Time unit selector (0.1s, sec, 10sec, min, etc.)

Time setting knob (set time)

Power indicator (green)

Time range selector 12 and 30 at full scale

Output indicator (yellow)

(Flashes when timer operates;

on when timer stops operating)

Time unit display window

Function R - Symmetrical Recycler ON first

Reset and Gate inputs working mode

If Reset contact is closed the function interrupted, the relay

is released and timing is reset. Nothing else happens until

Reset is released.

If Gate contact is closed while recycling, the timing opera-

tion is freezed and the output is kept at the state it was

when Gate has been closed. When it is released, timing

goes on from the point reached at the moment of closing

the Gate.