2

Specifications are subject to change without notice (21.03.08)

FAA01, FAA08

Function and Time Setting

Mode of Operation

Function Op

Delay on operate

The set delay period begins

as soon as the power supply

is connected. At the end of

the set delay the relay oper-

ates

and

doesn’t

release

until the power supply is

interrupted for at least 100

ms.

Function R

Symmetrical recycler

(ON first)

The relay operates and the

time period start as soon as

the power is applied. At the

end of the first set time peri-

od, the relay releases. At the

end of the second time peri-

od (equal to the first), the

relay operates again. This

sequence

continues

with

equal ON- and OFF- time

periods until the power sup-

ply is interrupted for at least

100 ms.

Function In

Interval

The relay operates and the

time period begins as soon

as the power is applied. The

relay releases at the end of

the time period or when the

power supply is disconnect-

ed for at least 100 ms.

Function Sh

One shot

The time period begins as

soon as the power supply is

connected and at the end of

this period the relay operates

for 1s.

Indication for

Power supply On

LED, green

Output ON

LED, yellow

(flashing when timing)

Environment

Degree of protection

IP 50

(front panel)

Operating temperature

-10 to +55 °C, R.H. < 85%

Storage temperature

-10 to +55 °C, R.H. < 85%

Housing

Dimensions

48 x 48 mm

Material

PA66

Weight

Approx. 95 g

Approvals

UL, CSA

CE marking

Yes

EMC

Electromagnetic Compatibillity

Immunity

According to EN 61000-6-2

Emission

According to EN 61000-6-3

Timer specifications

According to EN 61812-1

General Specifications

Lower left knob:

Setting of function

Op - delay on operate

R - simmetrical recycler

In - interval

Sh - one shot

Lower right knob:

Time unit selector

0.1sec (0.1 seconds)

sec

(seconds)

10sec (10 seconds)

min

(minutes)

10m

(10 minutes)

hrs

(hours)

10h

(10 hours)

Upper right knob:

Time range selector

12 or 30

Centre knob:

Time setting on absolute

scale

Power Supply

Overvoltage cat II

Rated operational voltage

(IEC 60947-1)

through terminals:

(FAA01DW24)

2, 10

12 to 240 VDC + 10% - 15%

12 to 240 VAC + 10% -15%,

45 to 65 Hz

(FAA08DW24)

2, 7

12 to 240 VDC + 10% - 15%

12 to 240 VAC + 10% -15%,

45 to 65 Hz

Power consumption

Rated operational power

AC

3 VA

DC

1.5 W

Supply Specifications