MODEL: 10JRE

http://www.m-system.co.jp/

10JRE SPECIFICATIONS

ES-0815 Rev.12 Page 1/3

High-density Signal Conditioners 10-RACK

4-WIRE RTD TRANSMITTER

(field-programmable)

Functions & Features

• Accepting direct input from a 4-wire Pt 1000 Ω and

providing a standard process signal

• Microprocessor based

• Field-programmable temperature range

• Linearization

• Burnout protection

MODEL: 10JRE-2[1]0-R[2]

ORDERING INFORMATION

• Code number: 10JRE-2[1]0-R[2]

Specify a code from below for each [1] and [2].

(e.g. 10JRE-2A0-R/BL/Q)

•Temperature range (e.g. 0 – 300 K)

• Measuring range (e.g. 100 – 1000 Ω)

• Linearization data (max. 16 points)

Use Ordering Information Sheet (No. ESU-1669) to specify

linearization data when the I/O signals are non-linear.

• Specify the specification for option code /Q

(e.g. /C01)

INPUT RTD (4-wire)

2: Pt 1000 Ω

[1] OUTPUT 1

Current

A: 4 – 20 mA DC (Load resistance 600 Ω max.)

Voltage

6: 1 – 5 V DC (Load resistance 500 Ω min.)

OUTPUT 2

0: None

POWER INPUT

DC Power

R: 24 V DC

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

[2] OPTIONS (multiple selections)

Burnout

blank: Upscale burnout

/BL: Downscale burnout

Other Options

blank: none

/Q: Option other than the above (specify the specification)

SPECIFICATIONS OF OPTION: Q

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

/C02: Polyurethane coating

/C03: Rubber coating

RELATED PRODUCTS

• Programming Unit (model: PU-2x)

• PC configurator software (model: JXCON)

Downloadable at M-System’s web site.

A dedicated cable is required to connect the module to the

PC. Please refer to the internet software download site or

the users manual for the PC configurator for applicable

cable types.

GENERAL SPECIFICATIONS

Construction: Rack-mounted; terminal access via screw

terminals at the front and via card-edge connector at the

rear; terminal cover provided

Connection

Input: M3.5 screw terminals (torque 0.8 N·m)

Output: Card-edge connector and M3.5 screw terminals

(torque 0.8 N·m)

Power input: Supplied from card-edge connector

Screw terminal: Nickel-plated steel

Housing material: Flame-resistant resin (black)

Isolation: Input to output to power

Linearization: 16 points max. within the range of -15.00 –

+115.00 % input or output; represented as percentage of

full-scale

Adjustments: Programming Unit (model: PU-2x);

linearization data, input range, zero and span, simulating

output, etc.

(Refer to the users manual of JXCON for the adjustments

configurable with JXCON)