SQ-PTS

Updated: 2014-01-16

© SignalQuest, LLC.

1999-2014

10 Water St.

Lebanon, NH 03766 USA

Tel: 603.448.6266

Fax 603.619.6330

www.signalquest.com

info@signalquest.com

3

Voltage on +Vcc - without regulator - NR option

0.3 V

4.2 V

with respect to GND

Voltage on +Vcc - with regulator - R option

0.3 V

5.8 V

Voltage on any input pin

5.8 V

with respect to GND

Peak-to-peak supply noise - without regulator -NR option

50 mV

Peak-to-peak supply noise - with regulator - R option

200 mV

Operating temperature

-40 º C

85 º C

Shock survivability

500 g

where 1 g is assumed

Operating vibration

0.25 g

Note: Exposure to conditions outside of the Absolute Maximum Ratings may damage the device. Prolonged exposure to

conditions at the Absolute Maximum Ratings may result in degraded performance of the device over time.

[Test conditions: 3.3v regulator, 25 º C unless otherwise specified]

Supply voltage - without regulator - NR option

2.9 V

3.5 V

with respect to GND

12 V tolerant versions

also available. Consult

factory.

Supply voltage - with 3.0 volt regulator - 3.0R option

3.2 V

5.8 V

Supply voltage - with 3.3 volt regulator - 3.3R option

3.5 V

5.8 V

Supply current - HP option

4.6 mA

Supply current - LP option

1.6 mA

Output voltage*

0.3 V

0.9 × Vcc

See note below

regarding Vcc.

Input voltage High

2.0 V

Input voltage Low

0.8 V

Output voltage High

0.895 × Vcc

Vcc

Output voltage Low

0 V

0.100 × Vcc

Output impedance – Trigger 1 and Trigger 2

10 KΩ

Output impedance – Trigger 3 and Trigger 4

1 Ω

Max sink current =10

mA

*Note: For the NR model (without onboard regulator), Vcc is the voltage supplied to the device. For the 3.0R and 3.0R

models (3.0 V or 3.3 V onboard regulators), Vcc is 3.0 V or 3.3 V respectively. If your application requires using a 12 V

supply, consult factory for 12 V tolerant models.