4

power.pulseelectronics.com

SPM2007_52 (06/19) http://www.power.pulseelectronics.com/contact

High Frequency Planar Transforms

PA08XXNL Series (up to 140W)

Pulse Worldwide Headquarters

15255 Innovation Drive Ste 100

San Diego, CA 92128

U.S.A.

Tel: 858 674 8100

Fax: 858 674 8262

Pulse Europe

Pulse Electronics GmbH

Am Rottland 12

58540 Meinerzhagen

Germany

Tel: 49 2354 777 100

Fax: 49 2354 777 168

Pulse China Headquarters

Pulse Electronics (ShenZhen) CO., LTD

D708, Shenzhen Academy of

Aerospace Technology,

The 10th Keji South Road,

Nanshan District, Shenzhen,

P.R. China 518057

Tel: 86 755 33966678

Fax: 86 755 33966700

Pulse South Asia

3 Fraser Street 0428

DUO Tower

Singapore 189352

Tel: 65 6287 8998

Fax: 65 6280 0080

Pulse North Asia

1F., No.111 Xiyuan Road

Zhongli District

Taoyuan City 32057

Taiwan (R.O.C)

Tel: 886 3 4356768

Fax: 886 3 4356820

For More Information

Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned

herein may be trademarks or registered trademarks of their respective owners. © Copyright, 2019. Pulse Electronics, Inc. All rights reserved.

Pulse North China

Room 2704/2705

Super Ocean Finance Ctr.

2067 Yan An Road West

Shanghai 200336

China

Tel: 86 21 62787060

Fax: 86 2162786973

1.

The primary inductance for any configuration can be calculated as:

2.

The above base part numbers (

PA08XXNL) are available from stock.

3.

It is possible to add a small gap to the transformer. Gapped transformers are non-

standard and can be made available upon request, but are not typically available

from stock. To request a gapped version of the transformer, add a suffix “G” to the

base number (i.e. PA0801

GNL or PA0801.004GNL etc.). The nominal inductance with

the a gap can be calculated as:

4.

It is possible to add a primary side aux. winding to any of the above configura-

tions as shown in the schematics. Transformers with primary size aux. windings are

non-standard and can be made available upon request, but are not typically available

from stock. The primary aux. winding can be between 2 and 16 turns. To add a pri-

mary aux. winding to a given base, use the extension

.0XX. For example, to add a 4T

aux. winding to the base part number PA0801NL, use the part number

PA0801.004NL.

To add a 16T aux. winding, use the part number

PA0801.016NL.

5.

Optional Tape & Reel packaging can be ordered by adding a “

T” suffix to the

complete part number (i.e. PA0801 becomes PA0801

T for no AUX - PA0801.009NL

becomes PA0801T.009NL

T for 9T AUX). PUlse complies to industry standard tape and

reel specification EIA481.

Notes: