RaDec-M

4

Germany: +49 621 776 1111

Pepperl+Fuchs Group

Refer to "General Notes Relating to Pepperl+Fuchs Product Information".

USA: +1 330 486 0001

Singapore: +65 6779 9091

www.pepperl-fuchs.com

fa-info@us.pepperl-fuchs.com

fa-info@sg.pepperl-fuchs.com

fa-info@de.pepperl-fuchs.com

Radar sensor

Sensing Range

A narrower or wider sensing area can be achieved with turning the plug-in antenna.

Sensitivity Settings

The sensitivity potentiometer can be used to adjust the size of the detection field.

Other suitable accessories can be found at www.pepperl-fuchs.com

Microwave sensors are microwave scanners that use the principle of the Doppler radar. The most important requirement for

microwave detection is that the object to be detected is moving. Some applications include controlling automatic and industrial

doors.

The microwave sensors emit microwaves of a defined frequency in order to detect people and large objects moving at speeds

between 100 mm/sec and 5 m/sec. Stationary people or objects are not detected. Based on the latest 24 GHz technology with

integrated microprocessor control, these sensors provide a high degree of reliability even in difficult operating conditions. The

24 GHz frequency, known as the ‘K-band,’ is reserved by CETECOM for this application area worldwide.

• Opening impulse sensors for automatic doors and industrial doors

• Monitoring approach areas to elevators

• Motion sensors for people and objects

Commissioning

Wide:

Mounting height 2200 mm / tilt angle 30°

Antenna position:

Narrow:

Mounting height 2200 mm / tilt angle 30°

Antenna position:

The detection field can be swivelled in 10 steps from 0° ... 90°.

Accessories

Function Principle

Application

appr

ox

. 2

m

approx. 4.5

m

approx.

2.0 m

approx.

4.5

m

min.

50 %

max.

max.

min.