MODEL: R5-DA16

R5-DA16 SPECIFICATIONS

ES-6125 Rev.8 Page 1/5

http://www.m-system.co.jp/

Remote I/O R5 Series

DISCRETE INPUT MODULE

(Di 16 points)

18 (.71)

90

(3.54)

90

(3.54)

mm (inch)

MODEL: R5-DA16[1][2]

ORDERING INFORMATION

• Code number: R5-DA16[1][2]

Specify a code from below for each [1] and [2].

(e.g. R5-DA16W/A/Q)

• Specify the specification for option code /Q

(e.g. /C01)

NO. OF CHANNELS

16: 16 points

[1] COMMUNICATION MODE

S: Single

W: Dual

[2] OPTIONS (multiple selections)

Excitation

Blank: Internal

/A: External (24 V DC, positive common)

Other Options

blank: none

/Q: Option other than the above (specify the specification)

SPECIFICATIONS OF OPTION: Q

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

/C02: Polyurethane coating

/C03: Rubber coating

RELATED PRODUCTS

• Cable (model: MCN20)

(in combination with Relay I/O output block, Omron Model:

G7TC-ID16 or G7TC-IA16)

RELATED PRODUCTS

•Cable with connectors (OMRON)

250 mm (model: G79-O25C)

500 mm (model: G79-O50C)

•Connector/terminal block converter (OMRON)

model: XW2D-20G6

GENERAL SPECIFICATIONS

Connection

Internal bus: Via the Installation Base (model: R5-BS)

Input: 20-pin connector

OMRON model: XG4A-2034

Internal power: Via the base (model: R5-BS)

Isolation: Input to internal bus or internal power

RUN indicator: Bi-color (red/green) LED;

Red when the bus A operates normally;

Green when the bus B operates normally;

Amber when both buses operate normally.

Input status indicator: Red LED; turns on with the inputs ON.

INPUT SPECIFICATIONS

■ Internal Excitation

Input: Dry contact, 16 points

Common: All negatives

Contact detecting: 5 V DC

ON voltage, current: ≥ 3 V, ≥ 1 mA

OFF voltage, current: ≤ 1 V, ≤ 0.5 mA

■ External Excitation

Input: 24 V DC, 16 points (input resistance 6 kΩ)

Common: All positives

Contact detecting: 24 V DC ±10 %

ON voltage, current: ≥ 15 V, ≥ 2.5 mA

OFF voltage, current: ≤ 6 V, ≤ 1 mA

INSTALLATION

Operating temperature: -10 to +55°C (14 to 131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Atmosphere: No corrosive gas or heavy dust

Mounting: Installation Base (model: R5-BS)

Weight: 100 g (3.53 oz)

PERFORMANCE

Data allocation: 1

Response time: ≤ 0.1 sec.

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 1500 V AC @ 1 minute

(input to internal bus or internal power)

2000 V AC @ 1 minute (power input to FG; isolated on the

power supply module)