R7G4HH-A-SVF4-R datasheet(2/11 Pages) MSYSTEM

2 / 11 page

MODEL: R7G4HH-A-SVF4

R7G4HH-A-SVF4 SPECIFICATIONS

ES-7777-B Rev.1 Page 2/11

http://www.m-system.co.jp/

■Recommended solderless terminal

3.3 (.13) max

mm (inch)

HLS COMMUNICATION

Communication mode: Full-duplex or half-duplex

Network cable

•Shield cable

Full-duplex communication:

ZHY262PS / ZHT262PS (Shinko Seisen Industry Co., Ltd.)

Half-duplex communication:

ZHY221PS (Shinko Seisen Industry Co., Ltd.)

•Dual-shield cable

ZHY262PBA (Shinko Seisen Industry Co., Ltd.)

Transmission distance:

12 Mbps: 100 meters (328 ft)

6 Mbps: 200 meters (656 ft)

(Baud rate configurable with DIP SW; factory default: 12

Mbps)

Note: The above transmission distance is a reference value

when the HLS master unit is one-to-one connected to the

HLS slave unit (R4GHH) with a designated double shielded

cable. The actual distance may differ depending on the

system configuration (types of the master/slave units,

communication cable, the number of slaves connected,

etc.), settings, and/or the installation environment.

Terminating resistor: Built-in (Selected with the DIP SW;

factory default: disabled)

Status indicator: RUN

(Refer to the instruction manual for details.)

Station address: Selectable with rotary switch

(Refer to the instruction manual for details.)

INPUT SPECIFICATIONS

■ DC Current

Input resistor: 50 Ω

Input range: -20 to +20 mA DC, 0 to 20 mA DC,

4 to 20 mA DC

■ Narrow span voltage

Input resistance: ≥ 100 kΩ

Input range: -1 to +1 V DC, 0 to 1 V DC, -0.5 to +0.5 V DC

■ Wide span voltage

Input resistance: ≥ 1 MΩ

Input range: -10 to +10 V DC, -5 to +5 V DC,

0 to 10 V DC, 0 to 5 V DC, 1 to 5 V DC

INSTALLATION

Current consumption

•DC: Approx. 70 mA

Operating temperature: -10 to +55°C (14 to 131°F)

Storage temperature: -20 to +65°C (-4 to +149°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Atmosphere: No corrosive gas or heavy dust

Mounting: Surface or DIN rail (35 mm rail)

Weight: 210 g (0.46 lb)

PERFORMANCE

Conversion accuracy: ±0.1 %

Conversion rate: 200 μsec. per 4 channels

Data range: 0 – 10000 of the input range

Temp. coefficient: ±0.015 %/°C (±0.008 %/°F)

Input delay time: ≤ 1 msec. (0 - 90 %)

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 1500 V AC @ 1 minute

(input 0 to input 1 to input 2 to input 3 to HLS or FE to

power)

STANDARDS & APPROVALS

EU conformity:

EMC Directive

EMI EN 61000-6-4

EMS EN 61000-6-2

RoHS Directive

EN 50581

R7G4HH-A-SVF4-R Datasheet(PDF) 2 Page - M-System Co.,Ltd.

R7G4HH-A-SVF4-R Datasheet(HTML) 2 Page - M-System Co.,Ltd.

Html Pages

1 2 3 4 5 6 7 8 9 10 11

Datasheet Download

Link URL