SLG59M1685CTR datasheet(2/23 Pages) DIALOG

2 / 23 page

Datasheet

23-Oct-2018

CFR0011-120-01

Revision 1.00

Page 2 of 23

SLG59M1685C

A Low Power, 10 mΩ, 2 A, 0.82 mm2 WLCSP

Integrated Power Switch with Multiple Protection Features

Pin Description

Ordering Information

Pin #

Pin Name

Type

Pin Description

A2, B2

VIN

Power/

MOSFET

With an internal 1.07 V VIN(UVLO) threshold, VIN supplies the power for the operation of the

IC’s internal control circuitry. This terminal is also the drain terminal connection of the

n-channel MOSFET. Connect a 1 µF (or larger) low-ESR capacitor from this pin to ground.

Capacitors used at the VIN terminal should be rated at 10 V or higher.

A1, B1

VOUT

MOSFET

Source terminal connections of the n-channel MOSFET. Connect a low-ESR capacitor from

this pin to ground and consult the Electrical Characteristics table for recommended CLOAD

range. Capacitors used at VOUT should be rated at 10 V or higher.

Input

A low-to-high transition on this pin initiates the operation of the SLG59M1685C’s state

machine. ON is an asserted HIGH, level-sensitive CMOS input with ON_VIL < 0.25 V and

ON_VIH > 0.85 V. While there is an internal pull-down circuit to GND (~6 MΩ), connect this

pin to a general-purpose output (GPO) of a microcontroller, an application processor, or a

system controller.

GND

Ground connection. Connect this pin to system analog or power ground plane.

Part Number

Type

Production Flow

SLG59M1685C

WLCSP 6L

Industrial, -40

C to 85C

SLG59M1685CTR

WLCSP 6L (Tape and Reel)

Industrial, -40

C to 85 C

SLG59M1685CTR Datasheet(PDF) 2 Page - Dialog Semiconductor

SLG59M1685CTR Datasheet(HTML) 2 Page - Dialog Semiconductor

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23

Datasheet Download

Link URL