Read/write station

IUT-F190-R4-V1-FR2-13

and enhances process flow

UHF readwrite station, Malaysia

Function

The read/write station operates in the UHF frequency range and is optimized for use in industrial applications involving medium distances.

The device reads and writes passive tags acc. to EPC Generation 2 (ISO/IEC 18000-63). The read/write station is compliant with the relevant

transmission regulations.

The read/write station can be used in Malaysia.

Wide range of options supported for filtering data. The read/write station has an RS-485 interface and is connected via an M12 connector.

The user can monitor the status of the read/write station using the integrated LEDs.

The read/write station has a typical detection range of around 2 meters; this range is determined by the tag used and can be adjusted by

configuring the transmission power. Other influencing factors include the setup and installation of the specific application and the surrounding

materials, particularly metal. The read and write distances for the relevant tag, which are detailed separately, have been established in a test

laboratory under ideal conditions. For the actual read and write distances under real conditions, the combination of read/write station and tag must

be tested in the desired application.

Parameterization

Interface transfer rate:

38400 Bit/s

Port settings:

8 data bits, no parity, 1 stop bit, no handshake

Transpondertype:

80

Application

This product is a wireless device and may be operated only in the country for which a transmission license exists. Information regarding

transmission licenses can be found on the datasheet for the product. If a product is released to a customer in a country for which there is no

transmission license, the product may be operated only in the country for which a transmission license exists.

If a product does not correspond to the legal requirements in force in the EU but is released to a purchaser within the EU, the product is intended

for use solely in the destination country of the end customer outside of the EU for which a transmission license exists. The product may therefore

under no circumstances be used directly by the purchaser or released to third parties for the purpose of distribution, application or use on the

market within the EU as part of a commercial activity.

In the event of an infringement, the purchaser is obliged to indemnify the supplier against any resulting damages, costs, penalty payments and

other expenses.

1

Germany: +49 621 776 1111

Pepperl+Fuchs Group

Refer to "General Notes Relating to Pepperl+Fuchs Product Information".

USA: +1 330 486 0001

Singapore: +65 6779 9091

www.pepperl-fuchs.com

fa-info@us.pepperl-fuchs.com

fa-info@sg.pepperl-fuchs.com

fa-info@de.pepperl-fuchs.com