installed in the tank circuit capacitance matching is a very critical condition to ensure that

the thermistor circuit can play a role in security protection, so the powersupply design

requirements for manufacturers should also take full account of this factor.

5.6 通过电路中的最大工作电压和最大启动电流等参数可以利用公式 R=U/I 计算出电阻

值范围。

Through the circuit maximum operating voltage and maximum starting current and other

parameters can use the formula R = U / I calculated the resistance valuerange.

5.7 以上这些选用原则可以锁定出 NTC 热敏电阻的对应型号，如果贵司有特殊设计需要

可与我司技术部洽谈。

These principles may choose to lock the NTC thermistor corresponding model, if your

company has special design needs with our technical department to discuss.

6.1 存贮环境条件

温度 Temperature

-10℃～+40℃

湿度 Humidity

≤70%RH

期限 Term

≤6 months (先进先出 First-in/ First-out)

地点 Place

1.不要暴露在下列环境条件下，否则将导致性能衰退或

参数漂移

Do not exposing the components to the

following conditions, otherwise, it may result

in deterioration of characteristics

2.腐蚀性或易氧化气体Corrosive gas or deoxidizing

gas

3.易燃易爆气体

Flammable and explosive gases

4.油、水和化学溶液

Oil, water and chemical liquid

5.太阳光下

Under the sunlight

Rev 2.0 :

www.leiditech.com

12.01.2019

10/24

10D-15