Electronic Components Datasheet Search
  English  ▼
ALLDATASHEET.NET

X  

SMDA08LCC Datasheet(PDF) 4 Page - Protek Devices

Part # SMDA08LCC
Description  LOW CAPACITANCE TVS ARRAY
PDF  5 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
Manufacturer  PROTEC [Protek Devices]
Direct Link  http://www.protekdevices.com
Logo PROTEC - Protek Devices

SMDA08LCC Datasheet(HTML) 4 Page - Protek Devices

  SMDA08LCC Datasheet HTML 1Page - Protek Devices SMDA08LCC Datasheet HTML 2Page - Protek Devices SMDA08LCC Datasheet HTML 3Page - Protek Devices SMDA08LCC Datasheet HTML 4Page - Protek Devices SMDA08LCC Datasheet HTML 5Page - Protek Devices  
Zoom Inzoom in Zoom Outzoom out
 4 / 5 page
background image
4
www.protekdevices.com
05074.R6 4/05
SMDA03LC
thru
SMDA24LCC
APPLICATION NOTE
The SMDAxxLC & SMDAxxLCC Series are TVS arrays designed to protect I/O or data lines from the damaging effects of ESD, EFT and other types
of surges. This product series provides both unidirectional and bidirectional protection, with a surge capability of 500 Watts P
PP per line for an 8/20µs
waveform and ESD protection > 40kV.
UNIDIRECTIONAL COMMON-MODE CONFIGURATION(Figure 1)
The SMDAxxLC Series provides up to four (4) lines of protection in a common-mode
configuration as depicted in Figure 1.
Circuit connectivity is as follows:
✔
Line 1 is connected to Pin 5.
✔
Line 2 is connected to Pin 6.
✔
Line 3 is connected to Pin 7.
✔
Line 4 is connected to Pin 8.
✔
Pins 1-4 are connected to ground.
BIDIRECTIONAL COMMON-MODE CONFIGURATION (Figure 2)
Ideal for Ethernet applications, SMDAxxLCC Series provides up to four (4) lines of
protection in a common-mode configuration as depicted in Figure 2.
Circuit connectivity is as follows:
✔
TPIN is connected to Pin 5.
✔
TPIP is connected to Pin 6.
✔
TPON is connected to Pin 1.
✔
TPOP is connected to Pin 2.
✔
Pins 3, 4, 7 & 8 are connected to ground.
CIRCUIT BOARD LAYOUT RECOMMENDATIONS
Circuit board layout is critical for Electromagnetic
Compatibility (EMC) protection. The following
guidelines are recommended:
✔
The protection device should be placed near the
input terminals or connectors, the device will
divert the transient current immediately before it
can be coupled into the nearby traces.
✔
The path length between the TVS device and the
protected line should be minimized.
✔
All conductive loops including power and ground
loops should be minimized.
✔
The transient current return path to ground
should be kept as short as possible to reduce
parasitic inductance.
✔
Ground planes should be used whenever
possible. For multilayer PCBs, use ground vias.
Figure 1. Unidirectional Common-Mode Protection
5
6
7
8
1
2
3
4
LINE 4
LINE 3
LINE 2
LINE 1
GND PLANE
Figure 2. Bidirectional Common-Mode Protection
5
6
7
8
12
34
TPIN
TPIP
TPOP
TPON



Html Pages

1 2 3 4 5


Datasheet Download

Go To PDF Page


Link URL



Does ALLDATASHEET help your business so far?  [ DONATE ] 

About Alldatasheet   |   Advertisement   |   Contact us   |   Privacy Policy   |   Link to Datasheet    |   Link Exchange   |   Manufacturer List
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com