Parameter

Symbol

Condition

min

typ

max

s Electrical Characteristics (Ta=25˚C)

Operating flux density

mT

mT

Low output voltage

0.4

V

B=30mT

V

B=30mT

mA

mA

Supply current

6

5.5

0.4

30

–30

µA

B=–30mT

10

µA

B= –30mT

10

High output current

Unit

Note 2) For the operating flux density,

±200 mT is also available as Rank A.

1.75

1.0

Unit : mm

The center of the Hall element is in the hatched area in the left figure.

s Hall Element Position

Marking surface

2 : GND

3 : Output

Applied flux direction

N

S

1

2

3

Flux density (B)

s Flux-Voltage Conversion Characteristics

s Precaution on Use

1. Change of the operation magnetic flux density dose not depend on the supply voltage,

because the stabilization power supply is built-in.

2. Change from “H” to “L” level increases the supply current by approx. 1mA.