2

Ordering information

To order an STM32MP157 Evaluation board, refer to Table 1. For a detailed description of each board, refer to its

user manual on the product web page. Additional information is available from the datasheet and reference

manual of the target STM32.

Order code

Board reference

User

manual

Target STM32

Differentiating

feature

STM32MP157D-EV1 •

MB1262: mother board

•

MB1263: MPU subsystem daughterboard

•

MB1230: DSI display board

•

MB1379: camera board

UM2648

STM32MP157DAA1 Basic security

STM32MP157F-EV1

STM32MP157FAA1

Secure Boot and

cryptography

2.1

Product marking

The sticker located on the top or bottom side of the PCB board shows the information about product identification

such as board reference, revision, and serial number.

The first identification line has the following format: “MBxxxx-Variant-yzz”, where “MBxxxx” is the board reference,

“Variant” (optional) identifies the mounting variant when several exist, "y" is the PCB revision and "zz" is the

assembly revision: for example B01.

The second identification line is the board serial number used for traceability.

Evaluation tools marked as “ES” or “E” are not yet qualified and therefore not ready to be used as reference

design or in production. Any consequences deriving from such usage will not be at ST charge. In no event, ST will

be liable for any customer usage of these engineering sample tools as reference designs or in production.

“E” or “ES” marking examples of location:

•

On the targeted STM32 that is soldered on the board (For an illustration of STM32 marking, refer to the

STM32 datasheet “Package information” paragraph at the www.st.com website).

•

Next to the evaluation tool ordering part number that is stuck or silk-screen printed on the board.

2.2

Codification

The meaning of the codification is explained in Table 2.

STM32MP1XXY-EVZ

Description

Example: STM32MP157F-EV1

STM32MP1

MPU series in STM32 Arm Cortex MPUs

STM32MP1 Series

XX

MPU product line in the series

STM32MP157

Y

Options:

•

D: basic security, 800 MHz increased frequency

•

F: Secure Boot, cryptography hardware, 800 MHz

increased frequency

Secure Boot, cryptography

hardware, 800 MHz increased

frequency

EVZ

Evaluation board configuration

•

EV1: with PMIC

PMIC

STM32MP157D-EV1 STM32MP157F-EV1

Ordering information

DB4021 - Rev 2

page 3/7