PCA8553DTTSLASHA datasheet(7/52 Pages) NXP

7 / 52 page

NXP Semiconductors

PCA8553

Automotive 40 × 4 LCD segment driver

7.2 Command registers of the PCA8553

7.2.1 Command: Device_ctrl

The Device_ctrl command sets the device into a defined state. It should be executed

before enabling the display (see bit DE in Table 6).

Bit

Symbol

Value

Description

7 to 5

000

default value

frame frequency selection

000

ffr = 32 Hz

001[1]

ffr = 64 Hz

010

ffr = 96 Hz

011

ffr = 128 Hz

100

ffr = 160 Hz

101

ffr = 192 Hz

110

ffr = 224 Hz

4 to 2

FF[2:0]

111

ffr = 256 Hz

internal oscillator control

0[1]

enabled

OSC

disabled

clock output enable

0[1]

clock signal not available on pin CLK;

pin CLK is in 3-state

COE

clock signal available on pin CLK

Table 5. Device_ctrl - device control command register (address 01h) bit

description

[1]

Default value.

7.2.1.1 Internal oscillator and clock output

Bit OSC enables or disables the internal oscillator. When the internal oscillator is used,

bit COE allows making the clock signal available on pin CLK. If this is not intended, pin

CLK should be left open. The design ensures that the duty cycle of the clock output is

50 : 50 (% HIGH-level time : % LOW-level time).

In applications where an external clock has to be applied to the PCA8553, bit OSC must

be set logic 1 and COE logic 0. In this case pin CLK becomes an input.

In power-down mode (see Section 7.3.1)

• if pin CLK is configured as an output, there is no signal on CLK

• if pin CLK is configured as an input, the signal on CLK can be removed.

Remark: A clock signal must always be supplied to the device if the display is enabled

(see bit DE in Table 6). Removing the clock may freeze the LCD in a DC state, which is

not suitable for the liquid crystal.

PCA8553

All information provided in this document is subject to legal disclaimers.

Product data sheet

Rev. 4 — 1 October 2021

7 / 52

PCA8553DTT/A Datasheet(PDF) 7 Page - NXP Semiconductors

PCA8553DTT/A Datasheet(HTML) 7 Page - NXP Semiconductors

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52

Datasheet Download

Link URL