 |
Electronic Components Datasheet Search |
|
|
Electronic Components Datasheet Search |
|
8MCANTA7SL Datasheet(PDF) 10 Page - SOURIAU-SUNBANK Connection Technologies |
|
|
|||||||||||||||||||||||||||||
8MCANTA7SL Datasheet(HTML) 10 Page - SOURIAU-SUNBANK Connection Technologies |
|
|
10 / 42 page  microComp® Series 10 Mechanical Description Requirement Test method Endurance / Durability 500 mating/unmating operations Connectors shall meet contact resistance, insulation resistance, DWV, mating and unmating force MIL-DTL 83513 8 cycles/minute maximum Insert retention in shell 34,4 N/cm² (50 psi) MIL-DTL 83513 Tensile test F>60N for #24 cable, F>45N for #26 cable and F>30N for #28 cable SAE AS-39029 Vibration No discontinuity > 1µs, no cracking, breaking or loosening of parts, plug shall not become disengaged from receptacle. Connectors shall meet electrical requirements after vibration test. Random: 44g IEC 60068-2-35, test Fda (8h x 3 axis, f1 = 20Hz, f2 = 2000Hz) Sine: 20g IEC 60512-4 test 6d (30min x 3 axis, 10Hz-2000Hz) Shock and Bump No discontinuity > 1µs, no cracking, breaking or loosening of parts, plug shall not become disengaged from receptacle. Connectors shall meet electrical requirements after shock and bump tests. Shock: 50g for 11ms IEC 60512-4 6c (3 shocks x 3 axis x 2 directions = 18 shocks) Bump: 390 m/s² IEC 60512-4 6b (4,000 ± 10 bumps x 3 axis x 2 directions = 24,000 bump) Contact insertion/ removal endurance Contact insertion and withdrawal forces < 13.5 N Contact retention in insert > 15 N 9 cycles insertion/removale Probe damage Separation force mini > 0.14 N IEC 60512-8 test 16A bending moment = 0.9 Ncm Contact retention in insert >15 N An initial force of 10N shall be applied to the engagement end of the contact. Then a force at a rate not exceeding 5N per sec shall be applied: displacement shall then be mesured from the insert face with the contact under load and it shall not exceed 0,3 mm (.012 in) at the required force. Max engagement force 1,66 N The maximum diameter test pin or minimum diameter test sleeve shall be engaged to 70% of the depth of the female mating cavity or length of the engagement male contact and separate 3 times. The engagement and separation forces shall be mesured on the third engagement and separation. Min separation force 0,14 N Technical features Detailed performances |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
English ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
