13

FH69 Series/0.5mm Pitch, 2.3mm Height, Top and Bottom Independent 2-point Contact, 125℃ Heat Resistance FPC/FFC Connector

FPC Insertion or Removal while

Actuator is Closed

Twisting the FPC during FPC Insertion

or Removal

Insertion or Removal of FPC at an Excessive Angle

in Respect to the Board

Insertion or Removal Horizontal to the Board

OK

FPC Insertion

Opening Guide

Insertion : 10°

Removal : At an angle so that

　　　　 both FPC tabs lay

　　　　　over the housing

Actuator (Closed)

0°

FPC Insertion

Opening Guide

2. FPC Insertion and Extraction Method

・Insert the FPC fully at a 10°upward angle in respect to the board. Position both FPC tabs to the insertion opening guide

and then insert completely.

・When removing the FPC, pull it out upward in a diagonal direction so that both tabs lay over the housing boss.