LEE-128G032B-3

www.vishay.com

Vishay Dale

Revision: 07-Dec-12

1

Document Number: 37098

For technical questions, contact: displays@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

LED Display Modules

128 x 32 Graphics Display with Drive Electronics and + 5 V HC CMOS Level Video Interface

Green LED Modules, Normal Brightness, Single Board Construction, RoHS-Compliant

The LEE-128G032B-3 is an LED replacement for the popular

APD-128G032 plasma display module. It is designed to

offer high brightness and superior viewing characteristics in

a slim package. This display is ideal for low to medium level

information content and is ideal for applications such as

arcade games, process control, POS terminals, medical

equipment, message centers and ATM machines.

The LEE-128G032B-3 LED display offers high contrast,

wide viewing angle, and long distance readability. It emits a

bright green color which catches the attention of the viewer,

but is yet comfortable to the eye.

The LEE-128G032B-3 LED display has a video type

interface and is driven in a standard row/column refresh

method. Pixel data is clocked for a row, and rows are

scanned sequentially. Signals are presented for serial data,

dot clock, column latch, row data, row clock and display

enable. The serial data is entered with the dot clock up to

frequencies as high as 8 MHz. After a row of 128 pixels is

clocked in, the column latch signal is toggled and the data

is latched. At the time the data is latched, the display is

briefly disabled using the display enable signal, then the

row pointer is advanced with the row clock signal. Once

each frame the row data must be asserted to synchronize

the column serial data with the beginning row. The

recommended scanning frequency is approximately 70 Hz,

but may be as high as 200 Hz.

Note

• Recommended operating voltages, all maximums are absolute

maximum

FEATURES

• LED replacement for the popular APD-128G032

plasma display module

• + 5 V HC CMOS level video interface

• Large characters

• Highly visible for long distance viewing

• > 30:1 contrast ratio

• Bright green color

• Slim profile

• Reduced power and brightness version

• Material categorization: For definitions of compliance

please see www.vishay.com/doc?99912

ELECTRICAL SPECIFICATIONS

Voltage(s) Required: + 5 VDC (VCC)

Power Required (Fully Lit): Typ. = 5.5 W, max. = 6.5 W

OPTICAL SPECIFICATIONS

Viewing Area: 12.75" [323.8 mm] W x 3.15" [80.01 mm] L

Character Size (5 x 7): 0.65" [16.51 mm] H x 0.45" [11.43 mm] W

Pixel Size: 0.063" [1.6 mm] H x 0.031" [0.8 mm] W

Pixel Pitch: 0.100" [2.54 mm]

Luminance: 100 ft-L minimum

Color: Bright green

Viewing Angle: > 150°

ENVIRONMENTAL SPECIFICATIONS

Operating Temperature: - 40 °C to + 85 °C

Storage Temperature: - 40 °C to + 85 °C

Relative Operating Humidity: To 95 % non-condensing

Mechanical Shock: 30 G

Vibration: 3 G

Operating Altitude: 10 000 ft

STANDARD ELECTRICAL SPECIFICATIONS

DESCRIPTION

SYMBOL

MIN.

TYP.

MAX.

UNITS

Logic and LED

Drive Voltage

VCC

+ 4.5

+ 5.0

+ 5.5

VDC

Logic and LED

Drive Current

(Fully Lit)

ICC

-1.1

1.3

ADC

Logic 1 Input

Vih

0.7 VCC

--

VDC

Logic 0 Input

Vil

-

-

0.3 VCC

VDC

DIMENSIONS in inches [millimeters]

0.250

Max.

0.062

7.25

14.80

7.25

12.68 Viewing Area

Pin 1 of J1

Pin 1 of J2

0.150 Mounting Holes (6 x)

1.057