VJ Non-Magnetic Series for Reflow Soldering

www.vishay.com

Vishay Vitramon

Revision: 15-Jan-2021

16

Document Number: 45227

For technical questions, contact: mlcc@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Notes

(1) Vishay Vitramon uses embossed plastic carrier tape

(2) Reference: EIA standard RS 481 - “Taping of Surface Mount Components for Automatic Placement”

(3) n/a = not available

(4) Packaging code “T/R” and lower quantities can depend on product thickness

(5) Paper / plastic tape used by availability

STANDARD PACKAGING QUANTITIES (1)(2)(3)

CASE

CODE

TAPE

SIZE

7" REEL QUANTITIES

11 1/4" AND 13" REEL QUANTITIES

PAPER TAPE

PACKAGING CODE

“C”

PLASTIC TAPE

PACKAGING CODE

“T”

LOW QUANTITY

PACKAGING CODE

“J” (5)

PAPER TAPE

PACKAGING CODE

“P”

PLASTIC TAPE

PACKAGING CODE

“R”

0402

8 mm

5000

n/a

1000

10 000

n/a

0603 (4)

8 mm

n/a

4000

1000

n/a

10 000

0805 (4)

8 mm

n/a

3000

1000

n/a

10 000

1206 (4)

8 mm

n/a

3000 / 2500

1000

n/a

10 000 / 9000

1210

8 mm

n/a

3000 / 2500 / 2000

1000

n/a

10 000 / 9000

1808

12 mm

n/a

2000

500

n/a

10 000

1812

12 mm

n/a

1000

500

n/a

4000

1825

12 mm

n/a

1000

500

n/a

4000

2220

12 mm

n/a

1000

500

n/a

4000

2225

12 mm

n/a

500

250

n/a

4000

3640

16 mm

n/a

500

n/a

n/a

n/a

STORAGE AND HANDLING CONDITIONS

(1) Store the components at +5 °C to +40 °C ambient temperature and

≤ 70 % relative humidity conditions.

(2) The product is recommended to be used within a time-frame of 2 years after shipment.

Check solderability in case extended shelf life beyond the expiry date is needed.

(3) For soldering conditions see Vishay Soldering Recommendations www.vishay.com/doc?45034.

Precautions:

a. Do not store products in an environment containing corrosive elements, especially where chloride gas, sulfide gas, acid, alkali, salt, or

the like are present. This may cause corrosion or oxidization of the terminations, which can easily lead to poor soldering.

b. Store products on the shelf and avoid exposure to moisture or dust.

c. Do not expose products to excessive shock, vibration, direct sunlight, and so on.