 2020 Microchip Technology Inc.

DS20006467A-page 3

MCP6V96/6U/7/9

1.0

ELECTRICAL CHARACTERISTICS

1.1

Absolute Maximum Ratings †

VDD –VSS .................................................................................................................................................................6.5V

Current at Input Pins ..............................................................................................................................................±2 mA

Analog Inputs (VIN+ and VIN-)(1) ...............................................................................................VSS – 1.0V to VDD +1.0V

All Other Inputs and Outputs ....................................................................................................VSS – 0.3V to VDD +0.3V

Difference Input Voltage .................................................................................................................................|VDD –VSS|

Output Short-Circuit Current .......................................................................................................................... Continuous

Current at Output and Supply Pins ......................................................................................................................±30 mA

Storage Temperature .............................................................................................................................-65°C to +150°C

Maximum Junction Temperature .......................................................................................................................... +150°C

ESD Protection on All Pins (HBM, CDM, MM)

MCP6V96/6U

  4kV, 1.5kV, 400V

MCP6V97/9

  4kV, 1.5kV, 300V

Note 1: See Section 4.2.1 “Rail-to-Rail Inputs”.

1.2

Specifications

†Notice: Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage to the

device. This is a stress rating only and functional operation of the device at those or any other conditions above those

indicated in the operational listings of this specification is not implied. Exposure to maximum rating conditions for

extended periods may affect device reliability.

TABLE 1-1:

DC ELECTRICAL CHARACTERISTICS

Electrical Characteristics: Unless otherwise indicated, TA = +25°C, VDD = +2.4V to +5.5V, VSS =GND,

VCM =VDD/3, VOUT =VDD/2, VL =VDD/2, RL =10kΩ to VL and CL = 30 pF (refer to Figures 1-4 and 1-5).

Parameters

Sym.

Min.

Typ.

Max.

Units

Conditions

Input Offset

Input Offset Voltage

VOS

-25

—

+25

µV

TA =+25°C

Input Offset Voltage Drift with

Temperature

(Linear Temperature Coefficient)

TC1

-150

—

+150

nV/°C TA = -40 to +125°C

(Note 1)

Input Offset Voltage Quadratic

Temperature Coefficient

TC2

—±74

—

pV/°C2 TA = -40 to +125°C

Input Offset Voltage Aging

∆VOS

—

±0.75

—

µV

408 hours Life Test

at +150°,

measured at +25°C.

Power Supply Rejection Ratio

PSRR

110

137

—

dB

Input Bias Current and Impedance

Input Bias Current

IB

-50

±2

+50

pA

Input Bias Current Across Temperature

IB

—+10

—

pA

TA =+85°C

IB

0+0.2

+1

nA

TA = +125°C

Input Offset Current

IOS

-400

±100

+400

pA

Input Offset Current Across

Temperature

IOS

—±75

—

pA

TA =+85°C

IOS

-500

±100

+500

pA

TA = +125°C

Common-Mode Input Impedance

ZCM

—1013||14

—

Ω||pF

Differential Input Impedance

ZDIFF

—1013||3

—

Ω||pF

Note 1:

For design guidance only; not tested.