FXPS7115D4S datasheet(68/74 Pages) NXP

68 / 74 page

NXP Semiconductors

FXPS7115D4S

Digital absolute pressure sensor, 40 kPa to 115 kPa

17 Mounting recommendations

The package should be mounted with the pressure port pointing away from sources of

debris which might otherwise plug the sensor.

A plugged port exhibits no change in pressure and can be cross checked in the user

software.

Refer to NXP application note AN1902[1] for proper printed circuit board attributes and

recommendations.

18 References

[1]

AN1902 - Assembly guidelines for QFN (quad flat no-lead) and SON (small outline no-lead) packages

https://www.nxp.com/docs/en/application-note/AN1902.pdf

[2]

AEC documents on Automotive Electronics Council Component Technical Committee’s site:

http://www.aecouncil.com/AECDocuments.html

[3]

AN12727 - FXPS7xxxDI4 User method to flash UF2

https://www.nxp.com/webapp/Download?colCode=AN12727&location=null

[4]

I2C-Bus specification and user manual — NXP User Manual (UM) 10204, Rev. 6 - 4 April 2014, 64 pages,

https://www.nxp.com/docs/en/user-guide/UM10204.pdf

19 Revision history

Document ID

Release date

Data sheet status

Change notice

Supercedes

FXPS7115D4S v.1 20220809

Objective data sheet

—

Modifications:

• Initial release.

Table 108. Revision history

FXPS7115D4S

All information provided in this document is subject to legal disclaimers.

Objective data sheet

Rev. 1 — 9 August 2022

68 / 74

FXPS7115D4S Datasheet(PDF) 68 Page - NXP Semiconductors