SN65LVDT2DBV datasheet(3/18 Pages) TI

3 / 18 page

www.ti.com

ABSOLUTE MAXIMUM RATINGS

DISSIPATION RATING TABLE

RECOMMENDED OPERATING CONDITIONS

SN65LVDS1

SN65LVDS2

SN65LVDT2

SLLS373H – JULY 1999 – REVISED JULY 2006

over operating free-air temperature range (unless otherwise noted)(1)

PARAMETER

RATINGS

Supply voltage range, VCC(2)

–0.5 V to 4 V

(A or B)

–0.5 V to 4 V

Input voltage range, VI

(D)

–0.5 V to VCC + 2 V

Output voltage, VO

(Y or Z)

–0.5 V to 4 V

Differential input voltage

SN65LVDT2 only

1 V

magnitude, |VID|

Receiver output current, IO

-12 mA to 12 mA

Human-body model electrostatic discharge, HBM ESD(3)

All pins

4000 V

Bus pins (A, B, Y, Z)

9000 V

Machine-model electrostatic discharge, MM ESD(4)

400 V

Field-induced-charge device model electrostatic discharge, FCDM ESD(5)

1500 V

Continuous total power dissipation, PD

See Dissipation Rating Table

(1)

Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings

only, and functional operation of the device at these or any other conditions beyond those indicated under recommended operating

conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

(2)

All voltage values, except differential I/O bus voltages are with respect to network ground terminal.

(3)

Test method based upon JEDEC Standard 22, Test Method A114-A. Bus pins stressed with respect to GND and VCC separately.

(4)

Test method based upon JEDEC Standard 22, Test Method A114-A.

(5)

Test method based upon EIA-JEDEC JESD22-C101C.

TA ≤ 25°C

DERATING FACTOR

TA = 85°C

PACKAGE

POWER RATING

ABOVE TA = 25°C(1)

POWER RATING

725 mW

5.8 mW/

°C

402 mW

DBV

385 mW

3.1 mW/

°C

200 mW

(1)

This is the inverse of the junction-to-ambient thermal resistance when board-mounted (low-K) and with

no air flow.

PARAMETER

MIN

NOM

MAX

UNIT

VCC

Supply voltage

2.4

3.3

3.6

VIH

High-level input voltage

VIL

Low-level input voltage

0.8

Operating free-air temperature

–40

°C

|VID|

Magnitude of differential input voltage

0.1

0.6

Input voltage (any combination of input or common-mode voltage)

VCC–0.8

Submit Documentation Feedback

SN65LVDT2DBV Datasheet(PDF) 3 Page - Texas Instruments

SN65LVDT2DBV Datasheet(HTML) 3 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18

Datasheet Download

Link URL