XLAMP® CMB1306 PRO9™ LED

© 2023 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, EasyWhite®, and the Cree LED

logo are registered trademarks, and Pro9 is a trademark, of Cree LED. UL® and the UL logo are registered trademarks of UL LLC.

CLD-DS313

REV 1

20

NOTES

LED Use

This LED may be used for general indoor and outdoor commercial lighting applications. Use of this LED in medical equipment, airfields,

runways, aircraft, stage studios applications, information displays utilizing LCD Backlights and other emissive pixel display technology,

or products intended for sale for residential end-use applications is prohibited (“Use Restrictions”). Purchaser of this LED must inform its

downstream customers of the aforementioned Use Restrictions. If purchaser and/or customer of purchaser breaches the use restriction

(“Breaching Party”), Cree LED must be timely notified of the breach and the Breaching Party must take reasonable measures to terminate

the breach. Failure to timely cure such breach may result in Cree LED halting supply of LEDs to the breaching party.

Measurements

The luminous flux, radiant power, chromaticity, forward voltage and CRI measurements in this document are binning specifications only

and solely represent product measurements as of the date of shipment. These measurements will change over time based on a number

of factors that are not within Cree LED’s control and are not intended or provided as operational specifications for the products. Calculated

values are provided for informational purposes only and are not intended or provided as specifications.

Pre-Release Qualification Testing

Please read the LED Reliability Overview for details of the qualification process Cree LED applies to ensure long-term reliability for XLamp

LEDs and details of Cree LED’s pre-release qualification testing for XLamp LEDs. Cree LED did not perform Room Temperature Operating

Life (RTOL) testing on the CMB1306 Pro9 LED.

Lumen Maintenance

Cree LED now uses standardized IES LM-80-08 and TM-21-11 methods for collecting long-term data and extrapolating LED lumen

maintenance. For information on the specific LM-80 data sets available for this LED, refer to the public LM-80 results document.

Please read the Long-Term Lumen Maintenance application note for more details on Cree LED’s lumen maintenance testing and

forecasting. Please read the Thermal Management application note for details on how thermal design, ambient temperature, and drive

current affect the LED junction temperature.

RoHS Compliance

The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold

limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as

implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Cree LED representative or from the Product

Ecology section of the Cree LED website.

REACH Compliance

REACH substances of very high concern (SVHCs) information is available for this product. Since the European Chemical Agency

(ECHA) has published notice of their intent to frequently revise the SVHC listing for the foreseeable future, please contact a Cree LED

representative to insure you get the most up-to-date REACH SVHC Declaration. REACH banned substance information (REACH Article 67)

is also available upon request.