ADAV400KSTZ datasheet(24/36 Pages) AD

24 / 36 page

ADAV400

Rev. 0 | Page 24 of 36

CONTROL PORT READ/WRITE DATA FORMATS

The read/write formats of the control port are designed to be

byte-oriented. To conform to this byte-oriented format, 0s are

appended to the data fields before the MSB to extend the data-

word to the next multiple of eight bits. For example, for

parameter RAM a 28-bit word is appended with four leading 0s,

making the transfer 4 bytes; for program RAM a 42-bit word is

appended with six leading 0s, making the transfer 6 bytes. The

data fields are appended to a 3-byte field consisting of a 7-bit

chip address, a read/write bit, and an 11-bit RAM/register

address for full I2C transfer.

Burst mode is used to fill contiguous register or RAM locations.

A burst mode write is done by writing the address and data of

the first RAM/register location to be written followed by the

next data-word, and so on. The ADAV400 control port auto-

increments the internal address counter depending on the

location being written to or read from, even across the

boundaries of the different RAMs and registers locations.

Table 16. Parameter RAM Read/Write Format (Single Address)

Byte 0

Byte 1

Byte 2

Byte 3

Bytes 4 to 6

chip_adr [6:0], R/W

000, param_adr [12:8]

param_adr [7:0]

0000, param [27:24]

param [23:0]

Table 17. Parameter RAM Block Read/Write Format (Burst Mode)

Byte 0

Byte 1

Byte 2

Byte 3

Bytes 4 to 6

Bytes 7 to 10

Bytes 11 to 14

chip_adr [6:0], R/W

000, param_adr [12:8]

param_adr [7:0]

0000, param [27:24]

param [23:0]

0000 param [27:0]

First parameter (param_adr)

Second parameter

(param_adr + 1)

Third parameter

(param_adr + 2)

Table 18. Program RAM Read/Write Format (Single Address)

Byte 0

Byte 1

Byte 2

Bytes 3 to 8

chip_adr [6:0], R/W

000, prog_adr [12:8]

prog_adr [7:0]

prog [42:0]

Table 19. Program RAM Block Read/Write Format (Burst Mode)

Byte 0

Byte 1

Byte 2

Bytes 3 to 8

Bytes 9 to 14

Bytes 15 to 20

chip_adr [6:0], R/W

000, prog_adr [12:8]

prog_adr [7:0]

prog [39:0]

First program word (prog_adr)

Second program word

(prog_adr + 1)

Third program word

(prog_adr + 2)

Table 20. Control Register Read/Write Format (16-bit register)

Byte 0

Byte1

Byte 2

Byte 3

Byte 4

chip_adr [6:0], R/W

000, reg_adr [12:8]

reg_adr [7:0]

data [15:8]

data [7:0]

Table 21. Control Register Read/Write Format (8-bit register)

Byte 0

Byte1

Byte 2

Byte 3

chip_adr [6:0], R/W

000, reg_adr [12:8]

reg_adr [7:0]

data [7:0]

Table 22. Data Capture Register Write Format

Byte 0

Byte 1

Byte 2

Byte 3

Byte 4

chip_adr [6:0], R/W

000, data_capture_adr [12:8]

data_capture_adr [7:0]

000, progCount [10:6]

progCount [5:0], regSel [1:0]

Table 23. Data Capture (Control Port Readback) Register Read Format

Byte 0

Byte 1

Byte 2

Bytes 3 to 5

chip_adr [6:0], R/W

000, data_capture_adr [12:8]

data_capture_adr [7:0]

data [23:0]

ADAV400KSTZ Datasheet(PDF) 24 Page - Analog Devices

ADAV400KSTZ Datasheet(HTML) 24 Page - Analog Devices

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36

Datasheet Download

Link URL