PIC16F1613 datasheet(2/19 Pages) MICROCHIP

2 / 19 page

 2019 Microchip Technology Inc.

DS40002077A-page 2

PIC16F1614/8

Intelligent Analog Peripherals

• 10-Bit Analog-to-Digital Converter (ADC):

- Up to 12 external channels

- Conversion available during Sleep

• Two Comparators (COMP):

- Low-Power/High-Speed mode

- Up to three external inverting inputs

- Fixed Voltage Reference at non-inverting

input(s)

- Comparator outputs externally accessible

• 8-Bit Digital-to-Analog Converter (DAC):

- 8-bit resolution, rail-to-rail

- Positive Reference Selection

• Voltage Reference:

- Fixed Voltage Reference (FVR): 1.024V,

2.048V and 4.096V output levels

• Zero-Cross Detect (ZCD):

- Detect when AC signal on pin crosses

ground

• Two High-Current Drive Pins:

- 100mA @ 5V

Clocking Structure

• 16 MHz Internal Oscillator:

- Selectable frequency range from 32 MHz to

31 kHz

• 31 kHz Low-Power Internal Oscillator

• 4x Phase-Locked Loop (PLL):

- For up to 32 MHz internal operation

• External Oscillator Block with:

- Three external clock modes up to 32 MHz

Note:

This document is supplemented by the

“PIC16(L)F1614/8 14/20-Pin, 8-Bit Flash

Microcontroller"

Data

Sheet

(DS40001769). See Section 1.0 “Device

Overview”.

PIC16F1613 Datasheet(PDF) 2 Page - Microchip Technology