M41T82RM6F datasheet(19/58 Pages) STMICROELECTRONICS

Part #	M41T82RM6F

Description	Serial RTC with battery switchover

PDF	58 Pages

Scroll/Zoom	100%

Manufacturer	STMICROELECTRONICS [STMicroelectronics]

Direct Link	http://www.st.com

Logo

19 / 58 page

M41T82 M41T83

Operation

19/58

2.3

WRITE mode

In this mode the master transmitter transmits to the M41T8x slave receiver. Bus protocol is shown in

Figure 15. Following the START condition and slave address, a logic '0' (R/W = 0) is placed on the bus

and indicates to the addressed device that word address “An” will follow and is to be written to the on-

chip address pointer. The data word to be written to the memory is strobed in next and the internal

address pointer is incremented to the next address location on the reception of an acknowledge clock.

The M41T8x slave receiver will send an acknowledge clock to the master transmitter after it has received

the slave address see Figure 12 on page 17 and again after it has received the word address and each

data byte.

Figure 15.

WRITE mode sequence

AI00591

BUS ACTIVITY:

SDA LINE

BUS ACTIVITY:

MASTER

DATA n

DATA n+1

DATA n+X

WORD

ADDRESS (An)

SLAVE

ADDRESS

M41T82RM6F Datasheet(PDF) 19 Page - STMicroelectronics