M28W640FCT datasheet(71/77 Pages) STMICROELECTRONICS

71 / 77 page

M28W640FCT, M28W640FCB

Flowcharts and pseudo codes

71/77

Figure 23.

Protection Register Program flowchart and pseudo code

Status check of b1 (Protected Block), b3 (VPP Invalid) and b4 (Program Error) can be made after each program operation

or after a sequence.

If an error is found, the Status Register must be cleared before further Program/Erase Controller operations.

Write C0h

AI04381

Start

Write Address

& Data

Read Status

YES

b7 = 1

YES

b3 = 0

b4 = 0

VPP Invalid

Error (1, 2)

Program

Error (1, 2)

protection_register_program_command (addressToProgram, dataToProgram) {:

writeToFlash (any_address, 0xC0) ;

do {

status_register=readFlash (any_address) ;

/* E or G must be toggled*/

} while (status_register.b7== 0) ;

if (status_register.b3==1) /*VPP invalid error */

error_handler ( ) ;

YES

End

YES

b1 = 0

Program to Protected

Block Error (1, 2)

writeToFlash (addressToProgram, dataToProgram) ;

/*Memory enters read status state after

the Program Command*/

if (status_register.b4==1) /*program error */

error_handler ( ) ;

if (status_register.b1==1) /*program to protect block error */

error_handler ( ) ;

}

M28W640FCT Datasheet(PDF) 71 Page - STMicroelectronics

M28W640FCT Datasheet(HTML) 71 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77

Datasheet Download

Link URL