B25355 datasheet(4/30 Pages) EPCOS

4 / 30 page

Siemens Matsushita Components

High peak-current capability

Wide capacitance and voltage range

Construction

Self-healing

Paper dielectric

Oil and hard-wax-impregnated tubular

windings (no PCB)

Metal-sprayed end faces ensure

reliable contacting

Tubular aluminum case

1-pole and 2-pole versions

Ceramic or plastic lead-throughs

With mounting bolt

(325 mm high capacitors without mounting bolt)

Terminals

Screw terminals M12

Screw-clamping terminals

Tab connectors 6,3 mm

Mounting parts

If the vibration stress is

≤ 5 g and the capacitors are ≤ 60 mm

in diameter and

≤ 160 mm in height, the bolt is used for mounting.

For capacitors without mounting bolt and in case of a vibration

stress > 5

g as well as for larger-sized capacitors refer to chapter

“Mounting parts”.

Grounding

Mounting bolt or grounding strap

for grounding in accordance with VDE 0100

Grounding identification in accordance with DIN 40 011

Overpressure disconnector (mechanical)

When the overpressure disconnector responds,

the capacitor extends by up to 8 mm.

So leave sufficient space above the terminals when mounting the capacitor.

Individual data sheets

Individual capacitors of this series are specified in detail

(incl. thermal data) on pages 78 … 93.

Upon request, these data sheets are available for each capacitor type.

MP DC Capacitors

Smoothing, Supporting, Discharge

B 25 355

Jump to preceding page

B25355 Datasheet(PDF) 4 Page - EPCOS

B25355 Datasheet(HTML) 4 Page - EPCOS

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30

Datasheet Download

Link URL