6 Specifications

6.1 Absolute Maximum Ratings

over operating free-air temperature range (unless otherwise noted)(1)

MIN

MAX

UNIT

Supply voltage: VS = (V+) – (V–)

–0.3

42

V

Input pins (IN+, IN–) from (V– ) (2)

–0.3

(V+) + 0.3

V

Current into Input pins (IN+, IN–)

–10

10

mA

Output (OUT) voltage (Open-Drain) from (V–)(4)

–0.3

42

V

Output (OUT) voltage (Push-Pull) from (V–)

–0.3

(V+) + 0.3

V

Output (OUT) current (4) (5) (6)

-10

10

mA

Junction temperature, TJ

150

°C

Storage temperature, Tstg

–65

150

°C

(1)

Operation outside the Absolute Maximum Ratings may cause permanent device damage. Absolute Maximum Ratings do not imply

functional operation of the device at these or any other conditions beyond those listed under Recommended Operating Conditions. If

used outside the Recommended Operating Conditions but within the Absolute Maximum Ratings, the device may not be fully

functional, and this may affect device reliability, functionality, performance, and shorten the device lifetime.

(2)

Input terminals are diode-clamped to (V–). Input signals that can swing more than 0.3 V beyond the supply rails must be current-limited

to 10 mA or less.

(3)

Output (OUT) for open drain can be greater than (V+) and inputs (IN+, IN–) as long as it is within the –0.3 V to 42 V range

(4)

The output is diode-clamped to (V-) for both output options, and diode clamped to (V+) for the push-pull output option. The open drain

version does not have a clamp to V+. Please see the Outputs and ESD Protection section of the Application Information Section for

more information.

(5)

Output sinking and sourcing current is internally limited to <35mA when operating within the Absolute Maximum output voltage limits.

The Absoulute Maximum Output Current limit specified here is the maximum current through the clamp structure when exceeding the

supply votlage below (V-) for both output options, or above (V+) for the push-pull option.

(6)

Short-circuit from output to (V–) or (V+). Continuous output short circuits at elevated supply voltages can result in excessive heating

and exceeding the maximum allowed junction temperature, leading to eventual device destruction.

6.2 ESD Ratings

VALUE

UNIT

V(ESD)

Electrostatic discharge

Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001(1)

±2000

V

Charged-device model (CDM), per JEDEC specification JESD22-C101(3)

±500

(1)

JEDEC document JEP155 states that 500 V HBM allows safe manufacturing with a standard ESD control process.

(2)

JEDEC document JEP157 states that 250 V CDM allows safe manufacturing with a standard ESD control process.

6.3 Recommended Operating Conditions

over operating free-air temperature range (unless otherwise noted)

MIN

MAX

UNIT

Supply voltage: VS = (V+) – (V–)

2.4

40

V

Input voltage range from (V–)

–0.2

(V+) + 0.2

V

Output voltage range from (V–)

Open Drain

–0.2

40

V

Push Pull

–0.2

(V+) + 0.2

V

Ambient temperature, TA

–40

125

°C

TLV1811, TLV1821, TLV1812, TLV1822, TLV1814, TLV1824

SNOSDC8C – SEPTEMBER 2022 – REVISED SEPTEMBER 2023

www.ti.com

6

Submit Document Feedback

Copyright © 2023 Texas Instruments Incorporated

Product Folder Links: TLV1811 TLV1821 TLV1812 TLV1822 TLV1814 TLV1824