| Electronic Components Datasheet Search |
|
L640DU21NF Datasheet(PDF) 20 Page - Advanced Micro Devices |
|
|
|||||||||||||||||||||||||||||
L640DU21NF Datasheet(HTML) 20 Page - Advanced Micro Devices |
|
20 / 57 page ![]() 18 Am29LV640D/Am29LV641D 22366C6 January 22, 2007 D A TA SH EET Write Protect (WP#) The Write Protect function provides a hardware method of protecting the first or last sector without using V ID. If the system asserts V IL on the WP# pin, the device disables program and erase functions in the first or last sector independently of whether those sectors were protected or unprotected using the method described in “Sector Group Protection and Unprotection”. Note that if WP# is at V IL when the device is in the standby mode, the maximum input load current is increased. See the table in “DC Characteristics” on page 34. If the system asserts V IH on the WP# pin, the device reverts to whether the first or last sector was previ- ously set to be protected or unprotected using the method described in “Sector Group Protection and Unprotection” on page 17. Temporary Sector Group Unprotect (Note: In this device, a sector group consists of four adjacent sectors that are protected or unprotected at the same time (see Table 4 on page 17)). This feature allows temporary unprotection of previ- ously protected sector groups to change data in-sys- tem. The Sector Group Unprotect mode is activated by setting the RESET# pin to V ID (8.5 V – 12.5 V). During this mode, formerly protected sector groups can be programmed or erased by selecting the sector group addresses. Once V ID is removed from the RESET# pin, all the previously protected sector groups are protected again. Figure 1, on page 18 shows the algo- rithm, and Figure 21, on page 44 shows the timing dia- grams, for this feature. Figure 1. Temporary Sector Group Unprotect Operation START Perform Erase or Program Operations RESET# = VIH Temporary Sector Group Unprotect Completed (Note 2) RESET# = V ID (Note 1) Notes: 1. All protected sector groups unprotected (If WP# = VIL, the first or last sector remains protected). 2. All previously protected sector groups are protected once again. |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |