AT90USB646_0607 datasheet(64/435 Pages) ATMEL

64 / 435 page

7593D–AVR–07/06

AT90USB64/128

8.1

Internal Voltage Reference

AT90USB64/128 features an internal bandgap reference. This reference is used for Brown-out

Detection, and it can be used as an input to the Analog Comparator or the ADC.

8.1.1

Voltage Reference Enable Signals and Start-up Time

The voltage reference has a start-up time that may influence the way it should be used. The

start-up time is given in Table 8-4. To save power, the reference is not always turned on. The

reference is on during the following situations:

When the BOD is enabled (by programming the BODLEVEL [2..0] Fuse).

When the bandgap reference is connected to the Analog Comparator (by setting the

ACBG bit in ACSR).

When the ADC is enabled.

Thus, when the BOD is not enabled, after setting the ACBG bit or enabling the ADC, the user

must always allow the reference to start up before the output from the Analog Comparator or

ADC is used. To reduce power consumption in Power-down mode, the user can avoid the three

conditions above to ensure that the reference is turned off before entering Power-down mode.

Note:

1. Values are guidelines only. Actual values are TBD.

8.2

Watchdog Timer

AT90USB64/128 has an Enhanced Watchdog Timer (WDT). The main features are:

• Clocked from separate On-chip Oscillator

• 3 Operating modes

–Interrupt

– System Reset

– Interrupt and System Reset

Table 8-4.

Internal Voltage Reference Characteristics

(1)

Symbol

Parameter

Condition

Min

Typ

Max

Units

VBG

Bandgap reference voltage

TBD

1.1

TBD

tBG

Bandgap reference start-up time

TBD

µs

IBG

Bandgap reference current

consumption

TBD

µA

AT90USB646_0607 Datasheet(PDF) 64 Page - ATMEL Corporation

AT90USB646_0607 Datasheet(HTML) 64 Page - ATMEL Corporation

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL