 |
Electronic Components Datasheet Search |
|
|
Electronic Components Datasheet Search |
|
TCS34713FN Datasheet(PDF) 28 Page - OSRAM GmbH |
|
|
|||||||||||||||||||||||||||||
TCS34713FN Datasheet(HTML) 28 Page - OSRAM GmbH |
|
|
28 / 39 page  ams Datasheet Page 27 [v1-01] 2018-Mar-27 Document Feedback TCS3471 − Application Information: Hardware Typical Hardware Application A typical hardware application circuit is shown in Figure 34. A 1- μF low-ESR decoupling capacitor should be placed as close as possible to the VDD pin. Figure 34: Typical Application Hardware Circuit VBUS in Figure 34 refers to the I²C bus voltage, which is either VDD or 1.8 V. Be sure to apply the specified I²C bus voltage shown in the Available Options table for the specific device being used. The I²C signals and the Interrupt are open-drain outputs and require pull-up resistors. The pull-up resistor (RP) value is a function of the I²C bus speed, the I²C bus voltage, and the capacitive load. The ams EVM running at 400 kbps, uses 1.5-k Ω resistors. A 10-k Ω pull-up resistor (RPI) can be used for the interrupt line. Application Information: Hardware TCS3471 INT SDA SCL VDD 1 mF GND VBUS RP RP RPI VDD |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
English ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
