Material

Polyolefin, cross-linked (POX)

Colour

Black (BK)

Shrink Ratio

3:1

Minimum Shrink

Temperature

+120 °C

Operating

Temperature

-45 °C to +125 °C

Dielectric Strength

15 kV/mm according to IEC 60684 P2

Flammability

self extinguishing in 30 seconds

according to SAE-AMS-DTL-23053/4

Insulation Pr oducts

Heat Shrinkable Moulded Shapes

299

2.2

Article-No.

Type

Supplied

Ø D

Recov.

Ø d

Wall

(WT)

Length

(L)

Length

(L2)

416-00000

PEC-3/1

3.0

1.0

1.0

25.0

20.0

416-00003

PEC-4.8/1.5

4.8

1.5

1.0

30.0

25.0

416-00001

PEC-6/2

6.0

2.0

1.0

30.0

25.0

416-00002

PEC-9/3

9.0

3.0

1.4

35.0

27.0

All dimensions in mm. Subject to technical changes.

Inner Wall Adhesive

• PEC

PEC-Series recovered

Pinched End Caps 3:1

with inner adhesive

The appropriate end cap for every cable diameter, and cable types.

PEC-Series expanded

The PEC-Series can be applied fast and easy

like a standard heat shrink tube. The inner

adhesive layer and the adhesive plug provide

a good and secure water protection. The

optimal shrink ratio of 3:1 and different

diameters allow a wide range of application.

Other diameters and lenghts are available

on request.

Application

Pinched End Caps can be used for mechanical

and environmental protection of stub splices

in electrical harnesses. Due to the fast and

easy installation, these caps can be used for

non-electrical applications as well.

Features and Benefits

Technical Table

Material Data

Date of issue: April 2011